The roller extrusion granulator is driven by an electric motor through a belt and belt pulley, which is transmitted to the drive shaft via a reducer and works synchronously in opposite directions with the passive shaft through open gears. It achieves uniform granulation through mold extrusion, demolding, crushing, and separation. The extrusion mold is carefully forged from wear-resistant materials with excellent corrosion resistance.

The shapes and sizes of the ball sockets on the roller skin can be customized to meet user needs, offering a wide range of options for roller extrusion granulators. The ball shapes include pillow, half-round grain, rod, shape, walnut, flat ball, and square bar.

The roller extrusion granulator is produced using a non-drying, room temperature process, achieving one-time molding.

The feeding port has been equipped with a mixing device, effectively ensuring uniform feed rate.

Box main frame with oiling and self-cleaning material device, textile material粘连roller skin.

The roller gap adjustment employs a step-by-step shifting mechanism, ensuring even spacing and ease of operation.

The roller skin alignment utilizes internal spline gear adjustment to ensure precise alignment and no misplacement.

The sphericity exceeds 95% with good particle size.

Finished granules require no secondary drying, are produced at room temperature, and have low moisture content.

One-shot molding for high production efficiency.

A variety of shapes and sizes of product granules are available for selection.