Aluminum brazing furnaceTechnical Features:
Process Design Flow of Aluminum Soldering: Assembly - Degreasing (thermal degreasing or water washing for degreasing) - Solder Paste Spraying - Drying - Preheating - Soldering - Cooling (under protective environmental atmosphere) - Quenching - Disassembly:
During the welding process,Soldering FurnaceThe atmosphere must meet high requirements, including oxygen concentration below 10ppm and below the dew point at -72℃. Additionally, the uniformity of the product reaching the same temperature as the brazing temperature is particularly important; the general requirement is ±3℃ for most products, with higher requirements for some. These factors are directly related to the heating elements of nitrogen in the setup.
Key Features of the Aluminum Brazing Furnace:
1. The process from flux stirring and spray, to product drying, brazing, and cooling is seamlessly automated and controllably continuous, reliably ensuring large-scale industrial production while significantly reducing costs.
All parameters related to soldering quality, such as drying temperature, soldering speed, soldering temperature, heating rate, nitrogen flow rate, and pressure, are determined and input into the program to ensure product stability through automatic control.
All critical components are globally sourced and optimized to ensure the reliability of the aluminum brazing furnace.
4. Aluminum brazing furnace cavity is filled with imported stainless steel plates (SUS316L or equivalent) for producing steel plates with a thickness of over 8mm.
5. The aluminum brazing furnace utilizes China's advanced automatic temperature control technology, with a temperature control accuracy of ±1°C.
Advanced aluminum brazing furnace atmosphere protection design, ensuring full protection of N2, with low N2 content during the operation of the work furnace brazing furnace.
