Professional Sandblasting and Shot Peening Room Manufacturer
Eco-friendly Air Blast Sand Blasting Room - Features: (Scroll down for a large collection of case photos for reference)
The overall operating costs of the sandblasting room are low and energy-efficient.
2. The sandblasting room features double-layer filtration, preventing sand clogging in the return sand pipe. This ensures smooth recycling of the abrasive material.
3. The sandblasting room features a honeycomb floor re-sanding structure, eliminating the need for excavation pits, significantly reducing land costs and construction time.
4. Simplify the structure; interlocking control can be applied to various systems, greatly enhancing the ease of maintenance and repair.
5. Standard modules are configured for critical wear areas, making maintenance and replacement easy, thus avoiding heavy repair work.
6. The sandblasting chamber utilizes an upper air supply and lower air suction to suppress dust and create a circulating method. Dust is constantly drained downward, resulting in high visibility within the chamber, a favorable working environment for employees, and ensuring both the quality and efficiency of the sandblasting operation; simultaneously, it protects the workers' physical and mental health.
7. The overall sand-suction floor recycles all sand material in one go, leaving no residue on the ground. The sandblasting room is kept clean and tidy on-site, eliminating the need for manual cleaning and saving working hours. The air conveying pipeline for sand returns, with a material recovery rate of up to 99%, makes it convenient for sand replacement.
8. The sandblasting room boasts advanced overall technical performance, with dust emissions meeting and exceeding national and local environmental protection standards, completely eliminating environmental pollution.
Manual operation procedures and methods
2.1 Turn on lighting, open the main door;
2.2 Exit the sandblasting room with the trolley, install workpieces.
2.3 The trolley enters the shot blasting room and the door is closed.
2.4 Inspect equipment and environmental conditions; start the dust removal and recycling systems upon normalcy.
2.5 Sandblasting operators enter the room and put on their sandblasting protective suits and connect the breathing filter.
2.6 Power up the sandblasting machine; workers manually sandblast the workpieces.
2.7 Clean or Sweep
2.8 Open the Door
2. 9 vehicles exit the sandblasting room, unloading parts.
Customization Requirements
Based on customer requirements and part dimensions, the housing working dimensions are designed as 18x6x6.5m. This sandblasting housing is constructed with a basic frame of 100mm square tubes, internally supported by 50mm square tubes, lined with 2mm steel plates and 3mm rubber sheets, and the outer walls are made of 50mm thick color steel sandwich panels, offering aesthetic appearance, easy installation, and corrosion resistance. The core of the color steel sandwich panels is expanded polystyrene foam. Compared to sandblasting housing bodies made with pure steel plates, it has the following features:
(1) The housing boasts excellent corrosion resistance, weather resistance, and waterproofing, allowing for outdoor placement: If the shot blasting housing is to be used outdoors, a simple rain shelter can be set up without the need for an additional factory building, significantly reducing infrastructure costs; (2) Excellent soundproofing and thermal insulation properties.
The sandblasting chamber body is constructed with sandwich color steel plates, with polyethylene foam as the core material, thereby offering excellent heat insulation and preservation properties. It effectively reduces the high-frequency, sharp noise generated during sandblasting from 1500Hz to 2000Hz to below 500Hz, significantly improving the noise environment.
(3) Sleek and aesthetically pleasing design:
Utilizing a sandwich panel structure, the sandblasting room body can be formed in one go, featuring a simple and smooth appearance, as well as being aesthetically pleasing and durable. No additional surface treatment or decoration is required.
(4) Easy to migrate and transform:
The entire body of the sandblasting room is designed in a modular style. Due to the characteristics of the color steel plate, it is lightweight, easy to cut, removable, and doesn't require a foundation, allowing for easy movement and addition of units. This makes it particularly suitable for disassembly, relocation, and secondary use when necessary.
Our company specializes in customizing various models of automatic sandblasting machines, sandblasting booths, paint booths, baking paint booths, shot blasting machines, spraying machines, air compressors, and sandblasting accessories. Please contact our business department promptly if needed. Phone: 0512-56795266 / 56795267 / 56795268 / 56795269 / 56715316
