SF6 Micro-water Sensor

Measurement Process

Connect and InitializeConnect the pipe to the instrument and the item to be measured. Once powered on, the instrument automatically enters the measurement state.

Traffic RegulationAt the beginning of the measurement, first open the flow valve on the panel and then adjust the flow using the needle valve on the instrument. At the end of the measurement, perform the operations in reverse order.

Cautionary Measures for TestingAfter long-term disuse, some air may remain in the test pipelines and chambers. During the initial test, these high-humidity gases may affect the testing speed as they are being measured.SF6Gas must be dried before reaching saturation. Subsequent tests (such as...The.No Chinese content provided.TaiSF6Electrical equipment typically operates at a faster pace.

Recommendations for High-Temperature Weather MeasurementWhen conducting measurements in hot weather, it is recommended to do so in the morning when temperatures are lower to minimize the impact of temperature on the measurement results.

Product Features

PortabilityThe instrument is designed to be lightweight and portable, easy to carry and use.

Rapid MeasurementNo waiting required after startup; immediate measurement begins, quickly providing the humidity value.

Efficient and energy-savingMeasurement consumes approximately0.5L（101.2kPaThe company has developed a new gas.

Secure ConnectorGerman-imported self-locking connectors ensure safety and reliability with no gas leakage.

Large-capacity data storageAvailable for storage800Group test data.

Clear DisplayLCD screen displays dew point and micro water intuitively.ppmEnvironmental temperature, humidity, time, and date, as well as battery power information.

Built-in power supplyEquipped with4AhRechargeable lithium-ion battery, with a single charge lasting10Hour.