SF6 Micro-water Analyzer

Measurement Operation

At the start of the measurement, make sure all needle valves on the pipe are fully opened. Subsequently, adjust the gas flow using the flow valve on the panel. Upon completion of the measurement, close the valves in the reverse order.

First-time use and long-term storage

If the micro hygrometer has been unused for an extended period, some air may remain in the test tubes and gas chambers. During the first test, the high humidity content in this air may affect the test speed, as the instrument needs to first expel this moisture.SF6Gases have reached saturation. However, fromThe.TwoAs the test begins, especially when conducting consecutive tests on multiple units.SF6In the case of electrical equipment, this process is significantly expedited, usually requiring only3-5Minute.

Measurement in the Heatwave

When conducting measurements under high-temperature conditions, it is recommended to opt for the cooler morning hours to ensure the accuracy of the measurement results.

Product Features

Portable Design: The instrument is compact and lightweight, easy to carry and use, suitable for various field environments.

Rapid Measurement: The instrument is ready for measurement immediately after being turned on, providing humidity readings swiftly without any delay.

High Efficiency, Low Gas Consumption: During the measurement process, the gas consumption is merely2L（101.2kPaEconomical and environmentally friendly.

Safety-Locking Connectors: Equipped with high-quality German进口 self-locking connectors, ensuring secure and reliable connections with no risk of gas leakage.

High-Capacity Data Storage: The instrument is equipped with a large-capacity storage, capable of storing multiple files.50Group test data for subsequent analysis and processing.

Clear Display: Equipped with a liquid crystal display, it can directly show dew point and moisture content.ppmKey information such as environmental temperature, humidity, current time, date, and battery power.

Built-in Power Supply: Equipped with4AhRechargeable lithium-ion battery, capable of continuous operation for up to10Hours, meeting the needs for long-duration on-site testing.