Verticality Deviation Tester

This instrument is based onGB/T 18380.1、IEC60332-1、JB/T 4278.5、BS、EN Standard Test Preparation. The specimen is fixed at both ends and vertically placed in a metal enclosure with metal plates on all three sides. Light the blowtorch, so that the tip of the blue inner cone touches the test surface and maintain the blowtorch perpendicular to the vertical axis of the specimen.45°.

1、 Metal Enclosure: High1200mmPlease provide the Chinese content to be translated.300mmDeep450mmOpen at the front, sealed at the top and bottom.

2、 Combustion chamber volume:1 m³Dimensions: 1500mm x 1200mm x 550mm

2There is no Chinese content provided for translation.1kw Our torch.

3. Integrated Combustion Light Calibration Device.

4. The machine will automatically cease ignition when the set burn time is reached.

5. Ignition is an automatic high-voltage electric ignition.

Fuel: Gas.Methane(Customer Provided)

Air Flow Meter: 15L/minGas Flow Meters0.1-1L/min Each one