Battery Compression Tester

Section 1: Compression Test Method Description:

Place the battery between two flat surfaces, compressing it perpendicularly to the direction of the electrodes, applying pressure between the two plates.13kN±0.78kNThe extrusion pressure, once it reaches a high value, can stop the extrusion test, and the equipment will automatically relieve pressure, completing the extrusion process.

1For cylindrical batteries, the longitudinal axis of the compressed battery should be parallel to the two flat plates of the compression device.

2For square and soft-pack batteries, only the wide face of the battery is compressed.

3For coin or button cells, apply pressure by aligning the battery's top and bottom surfaces parallel to the flat surface.

4、1Each sample is subjected to a single compression test.

Section II: Explanation of Compression Test Method

1、Please provide the Chinese content to be translated.20mmCylindrical or rhomboidal, pouch-style, buttoned/Coins-shaped cell or battery pack placed between two planes and squeezed. Squeezing at the first contact point at about1.5cm/sAt a rapid pace;

Product Features

1The main body is separated from the control console, allowing for remote operation, effectively safeguarding the safety of the test personnel.

2Automatic induction door locks, which can automatically open the box door upon completion of the test or manually open the box door.

3The box door is made with high-performance sealing materials and a unique sealing structure, offering excellent sealing, high-temperature resistance, and aging resistance.

4Smoke alarm and fire suppression system design, automatic smoke detection devices

5Anti-explosion and pressure relief device, which can effectively relieve pressure and explosion when the internal pressure of the box becomes too high.