Battery Internal Resistance Tester Brand

Battery Internal Resistance Tester Measurement Steps

Company News Brief                              

Battery Internal Resistance Tester, also known as the Universal Charging Battery Internal Resistance Tester, is a measuring instrument used to measure the internal resistance, voltage, and temperature of lead-acid batteries, lithium batteries, and other charging batteries to determine the battery's health status. It can also be used to measure electrolytic capacitors.ESRParameter Gauge (for reference only). This gauge utilizes AC4Terminal Test Method Measures Battery Internal Resistance, Unaffected by Test Wires, Terminals, and Battery VoltageExtreme.Between-contact resistance affects the accuracy of the measured value. It also features data storage, data review, alarm, and automatic shutdown functions. The entire unitHigh.No Chinese content provided. Please provide the text to be translated.Aesthetically pleasing, wide range, high resolution, easy to operate, portable, accurate, reliable, and with stable performance, strong anti-interference capability. An indispensable instrument for battery production, battery installation, equipment manufacturing, and equipment maintenance.

Battery Internal Resistance Tester is controlled by a microprocessor, internally16Please provide the Chinese content that needs to be translated into American English.ADCThe device can accurately detect battery resistance, voltage, and temperature. Its feature is not to stop operation.UPSMeasurements are conducted under system operation, utilizing AC low-resistance measurement and noise reduction technology, without the need to halt the normal operation of the equipment being measured, and the measurement is performed while in operation.Extreme.Significant time reduction in testing. Features include data storage, bar chart display, data upload to computers, smartphones, tablets, and other smart devices, as well as wireless measurement and data review via Bluetooth connectivity.

Measurement Steps

Internal Resistance Measurement:

1Connect the test line to the gauge, ensuring that the indicator marks (small arrows) on the test line correspond and are properly connected by color to the marks on the machine.

2Set up instrument parameters, refer to8.3.1Please provide the Chinese content to be translated.8.3.2。

3If using a test cable other than the standard one, short-circuit the four-line clamp of the test cable, then press the key to zero and calibrate.

4The test clamp is being attached to the battery.Extreme.The equipment has commenced testing.

5Waiting for stable reading test results.

Voltage Measurement:

This gauge can also be used as a DC voltmeter; simply connect the middle two red and black interfaces to measure DC voltage. Note not to measure AC voltage, and do not exceed...70VDirect current voltage.

When resistance displays“-----At that time, the voltage must be greater than0.1VJust shows values; otherwise, it only displays “-----Symbol)

Please provide the Chinese content to be translated.V+ V-In cases of excess voltage or measurement deviation, manual voltage zeroing can be performed. The operation method is to first short the test leads.V+ V-Please hold down the “VHold the key and then press the Enter key; you will hear a beep, indicating the zeroing is complete.

Temperature Measurement:

Insert the temperature sensor intoTEMP.SENSORInterfaces display the temperature when connected, and no temperature will be shown when sensors are not connected.