Pipeline Inspection Device

Pipeline management and maintenance, urban planning and construction, and power supply departments require pipeline inspections, which are essential for pipeline maintenance units.

（One）Feature-rich

Transmitter Function: Equipped with three signal application modes—inductive, direct, and clamp, catering to various on-site requirements.

2. Receiver Function: Used for measuring the location, direction, burial depth, and current of underground cables.

3. Left and right positioning arrows indicate the target pipeline location, with quick positioning.Please provide the Chinese content that needs to be translated.. .; Forward and backward arrowsThe decibel (dB) value indicates the location and size of the coating's damage points.

4. Backlit feature for night-time emergency operations.

5. Underground Cable Fault LocationNo Chinese content provided, original return: "No content provided."No Chinese content provided, original return: .确Positioning.

6. Current Measurement: Measures the current applied by the transmitter to the pipeline under test.

7. Multimeter Function: Measures output voltage, line voltage, line current, impedance, and power. Tests the continuity and insulation quality of cables before and after cable fault detection.

8. External Inductive Clamps: Ideal for situations where direct signal application is not possible during cable detection.

High positioning accuracy:

Multiple measurement modes for pipeline positioning(Valley Mode, Peak Mode, Broad Peak Mode, Peak Arrow Mode), capable of mutual verification to ensure pipeline positioningPlease provide the Chinese content to be translated.No Chinese content provided.No Chinese content provided. Please provide the text to be translated.

1、Extreme.Great Value MethodThe horizontal component or gradient change can be measured using the Peak Mode, Wide Peak Mode, or Peak Arrow Mode, and the location is determined based on the position of the higher values.

2、No Chinese content provided. Please provide the news content to be translated..The Small Value MethodUtilizing the valley mode, the system locates by determining the change in the vertical component and identifying the position of its lowest value.

(3) Multiple Depth Measurement Methods

A variety of depth measurement methods are available for selection., and can be mutually verified.

1. Dual-Level Coils Direct Reading Method

2. 80% and 50% methods for single horizontal coil

3. The 45-degree method.

(4) Strong anti-interference capability

1. Multi-parameter observation: capable of measuring both horizontal and vertical components, as well as horizontal gradients.

2. High transmission power: The transmitter offers an output power of up to 10W and is continuously adjustable, allowing for flexible selection as needed.

3. High work frequency:

Transmitter Frequency:128Hz、512Hz、1KHz、2KHz、8KHz、33KHz、65KHz、83KHz。

Receiver Frequency: Radio,50Hz、100Hz、512Hz、1KHz、2KHz、8KHz、33KHz、65KHz、83KHz。

Based on the characteristics of the target pipelineMaterials, structure, burial depth, length, etc., select a suitable working frequency based on the environment.

(Simplified Operation)

1. Intuitive: Utilizes a graphic display to continuously and in real-time show various parameters and signal strengths during the detection process.

2. Auto: During depth measurement, automatically switch to dual horizontal antenna mode and automatically adjust the receiver sensitivity for optimal signal reception. Upon completion of depth measurement, automatically revert to the original working mode.

(6) Extended working hours, low cost of operation

Transmitter equipped with a high-capacity lithium battery packA single charge can power the field exploration equipment for a full workday, allowing for reusable use, significantly reducing detection costs.

(7) Dual AC/DC Transmitter

Under normal circumstances, if the transmitter's battery is fully charged, the instrument is powered by its internal battery pack. Should the transmitter's battery run low during use but the detection task remains incomplete, a dedicated power adapter can be directly connected, allowing the instrument to continue functioning without the need to wait for it to recharge.