5-ton stationary hydraulicLifting PlatformParameters
| Product Model | Carrying Capacity | Counter Size: Length x Width | Maximum Height | Low discharge height | Lifting stroke | Motor Power |
| NGLPF050-45/17-017S | 5000 | 4500*1700 | 3600 | 500 | 3100 | 5.5 |
FixedLifting PlatformProduct Introduction
A fixed lifting platform is a stationary transportation device used for the vertical transport of goods between different work levels. Due to its sturdy structure, high load capacity, and smooth lifting, it is widely used for transporting goods between levels on production lines or automated assembly lines, for loading and unloading materials, and in assembly operations involving parts. It can also be used for cargo handling, vehicle lifting between levels in multi-story or underground parking garages. It can be appropriately configured according to different usage requirements and working environments. Moreover, it is easy to install and maintain, making it an essential tool for improving work efficiency in modern industrial production.
FixedLifting PlatformApplicable Occasions
Used for lifting heavy goods in power facilities, large factories, warehouses, ports, airports, parking lots, and other locations.
FixedLifting PlatformProduct Features：
The hydraulic system of the lifting platform is a well-known domestic brand/imported brand product, operating smoothly and durable.
2. The stroke is freely controlled via a stroke switch.
3. Heavy-duty oil cylinders with return devices and check valves to prevent the platform from dropping suddenly in case of oil pipe bursting.
4. Equipped with an emergency descent valve, which ensures the elevator safely descends in case of a sudden power failure while the system is in operation.
5. High-quality imported power components, safer and more durable.
Fixed hydraulicLifting PlatformMaintenance and care
1. Conduct regular monthly inspections of the shaft's operational status. If any screws are loose, they must be tightened immediately.
2. When performing maintenance and cleaning equipment, always raise the safety bar.
3. Do not load or unload cargo while in operation to avoid impacting the elevator and damaging the mechanical equipment.
4. The rotating devices of the mechanical equipment with grease nozzles should be lightly greased twice a month. If it is found impossible to add grease to a certain area, ensure the oil passage is clear or replace the grease nozzle, continuing this until grease is successfully added. Failure to do so will prohibit the use of the platform.
