Double-Circle Fence Mesh, also known as Double-Circle Isolation Fence, is a type of guardrail mesh. It is made by welding cold-drawn low-carbon steel wires into a tubular shape with the edge integrated into the mesh surface. It undergoes galvanizing for corrosion resistance and then is spray or dipped in various colors for plastic coating.*Attach the rear connection to the steel pipe支柱.
Spec:
1.Material:Q 235Low-carbon cold drawn steel wire
2.Dipped Galvanized Wire Diameter:4.5--5mm
3.Mesh:50mm X 200mm(Rectangular Hole)
4.*Large Size:2.4m X 3m
5.Surface Treatment: Galvanized, Powder Coated, Coated by Immersion Painting
Color:
Common colors for double-circle fence netting include green, red, blue, black, white, yellow, gray, etc.
Structure:
This product from the guardrail net factory is made by weaving and welding low-carbon steel wire into a metal mesh, then bending and rolling it into a cylindrical shape, and finally connecting it to steel pipe supports with accessories for fixation.
Advantages:
High strength, excellent steel properties, attractive appearance, broad view, easy installation, feeling bright, light, and practical; the mesh is tightly connected with the mesh posts, giving a good overall sense. The crimped edges significantly enhance the webbing strength.
Usage:
A distinctive protective product from a guardrail mesh factory, it has a low usage rate compared to other guardrails like framed guardrails and double-sided guardrails. It is generally used for decorative protection in places such as expressways, airports, municipal green spaces, garden beds, corporate green areas, and port green areas.
Installation Precautions:
1Upon delivery of the mesh panels and posts for the double-circle fence to the construction site, the contractor must provide the supervising engineer with a product certification. The supervising engineer has the right to conduct tests and inspections on mesh panels and posts with quality issues. The construction supervisor must check the bending degree of the posts on site, and require the removal of those with obvious deformation, curling, or scratches.
2During the concrete foundation construction for guardrail pillars, the construction unit shall follow the approved construction organization plan.TRANBBSDesign and design drawings must include the basic centerline, and the site must be leveled and cleared as necessary.*The linear appearance of the installed isolation fence is neat and straight. Before the concrete foundation is poured, the dimensions of the foundation pit and the spacing between pits must be inspected and approved by the supervising engineer before concrete pouring can proceed.
3Column installation must be meticulously performed.*The stability of the pillar and its tight connection with the base. Supports can be installed as needed to stabilize the pillar. During the installation process, a small line is used to check the straightness of the pillar installation, and adjustments are made locally.*The straight sections are straight, and the curved sections are smooth. The depth of the column埋 should comply with the design drawings. After the column installation is complete, the supervisor engineer must inspect the column's linearity, burial depth, and height, as well as the stability of the connection with the foundation. Only after meeting the requirements can the mesh installation proceed.
4The mesh must be securely connected to the posts, with the mesh surface flat after installation, showing no significant warping or unevenness. After the construction of the isolation fence is completed, the High Residency Office will organize relevant personnel to inspect the quality of the guardrail mesh..
