How to Renovate Factory Epoxy Floor Paint Damage

When the factory's epoxy flooring paint has been in use for a long time or if proper maintenance of the flooring paint was not carried out, leading to damage of the epoxy flooring paint, it is necessary to...

Floor Coating Renovation Underway. First, we need to identify the reasons for the damage to the floor coating, usually in factory environments, the causes are...

There are several reasons why paint may encounter various issues:

After prolonged use, the factory's epoxy flooring has developed numerous scratches, resulting in an unattractive and lackluster appearance.

2. The original construction of the factory's epoxy floor paint, with the bonding between the epoxy floor paint coating and the base ground being weak, led to issues with the factory's floor paint.

Peeling and shedding.

3. The factory floor paint was not applied strictly according to the construction process, resulting in wrinkles and bubbles on the epoxy floor paint surface.

4. The ground and underground areas were not fully sealed, resulting in blisters forming on the factory's epoxy floor paint and the extensive peeling of the coating.

5. The ground foundation was not sealed properly, or the intermediate coating had not dried completely before applying the epoxy surface coating, resulting in the floor paint separating.

Color.

6. The ground was not properly treated, such as with oil stains. The presence of chalking and sanding has led to the paint on the factory floor peeling off.

01

After analyzing the reasons for the renovation of the factory's epoxy floor paint, we also need to inquire from the client about the following two points:

1. Should we renovate partially or entirely? Explain to the client that partial renovation may result in color discrepancies and differences between new and old.

Clearly

2. What was the previous epoxy floor coating construction technique?

For worn-out factory floor coatings that have developed scratches, the following factory floor coating renovation procedures can be carried out.

1. Floor Grinding

2. Construction of epoxy floor coating finish (Static dissipative finish or non-static dissipative finish? Rolled finish or self-leveling finish?)

For situations 2-6, it is recommended that customers opt for a comprehensive ground renovation, as the currently sturdy-looking floor paint may...

It is still possible for it to fall off, therefore, it is recommended to sand off the old epoxy coating entirely before proceeding with the construction according to the established procedures.

It's a static-dissipative flooring renovation solution:

Material Usage Description:

Floor Grinding: Utilize dust-free floor grinding machines for dust-free grinding, cut irregular expansion joints, followed by using floor sanding machines for...

Sand the base surface thoroughly to achieve a flat, smooth finish, and clean it properly.

2. Epoxy Primer: The primer for anti-static epoxy flooring safely penetrates the surface.

3. Grounding Method: Lay copper foil or copper wire down to 1 meter from the ground and connect it to the grounding point.

4. Epoxy Intermediate Coating: Mix anti-static epoxy resin with quartz sand and other abrasive aggregates to apply 3 coats; each batch requires a repair after one coat.

Reinforce and refine.

5. Leveling Layer Construction: The leveling layer is constructed using anti-static medium paint mixed with quartz powder and other wear-resistant aggregates.

6. Epoxy Finish Coat: One-time forming with a trowel for anti-static self-leveling flat paint.

Material Usage and Blending:

The mixing area must be pre-lined with plastic sheeting to ensure a clean construction site environment, thereby guaranteeing product quality.

After opening the material, pour it into the mixing container. The hardener should be pre-poured into the base agent and mixed thoroughly using a mixer simultaneously.

During mixing, the mixer should move slowly to ensure the materials are well blended, taking approximately 3 to 5 minutes.

4. Unused main agents and hardeners that have been unpacked must be sealed and stored, and the use of fire and smoking is strictly prohibited.

5. The material mixing and storage areas must be strictly smoke and flame-free with appropriate warnings.

6. All materials, including main agents and hardeners, must be strictly categorized and cannot be mixed or used interchangeably.