Perforated plastic tracks are suitable for primary, middle, and high schools, as well as enterprises in various countries and regions, accommodating climates ranging from...Regions above -16 degrees are suitable, but not applicable to high-cold and snowy areas. Breathable plastic tracks have strict requirements for the base surface and construction techniques.

The construction process of breathable plastic tracks reveals a highly stringent principle, as the construction operations of the base surface alone can be divided into ten principle steps for strict control. All data is executed in accordance with the company's standard regulations by relevant departments. During the inspection and testing phase by the acceptance department, high-standard inspections must also be conducted in accordance with relevant standards set by organizations such as the International Association of Athletics Federations.

Simple Steps for Installing a Breathable Plastic Track:

Apply the single-component adhesive or primer evenly to the base surface using a tool.

2. Before the primer has cured, mix the single-component adhesive with the granules in the specified ratio, thoroughly blend them using a mixer, transport them to the site, and then spread them with a paver to the required thickness. Once cured, they form the elastic layer.

3. Mix breathable spray-on adhesive with EPDM granules and EPDM powder in the specified proportions, stir thoroughly, pour into the spray machine, and apply multiple coats according to regulations. After curing, it forms a non-slip, wear-resistant layer.