Mitutoyo Trimos Digital Caliper 293-583

Mitutoyo Three丰Digital Caliper 293-583

293 Series

Digital Outside Diameter Micrometer MDC-MB

●Large digital micrometer series with a length up to 500 mm, featuring a ratchet-type locking constant force device.

All models are equipped with measurement data output functionality, convenient for measuring large workpieces. Optional communication cables or wireless systems are available.

Unified, it facilitates easy data transfer, allowing import into spreadsheet software and more, with versatile usage methods.

● Measurement surface is made of hard alloy

■Feature

Origin Setting:

(ABS Measurement System)

Press the origin button, reset to the current micrometer screw position.

Set ABS origin. Depending on the size, the origin can be set.

Dot value.

Set to Zero

(INC Incremental Measurement System)

Briefly press the ZERO/ABS button, on the current micrometer screw

Location setting displays as zero, switch to (INC) Increment

Measurement Mode, hold the button to reset to ABS measurement mode

Available styles.

Data Hold: Press the Hold button to freeze the current value on the display.

A feature for operation in poor visibility conditions.

Prior to recording the readings, the instrument must be removed from the workpiece.

The measurement at the time of descaling is very useful.

Function Lock: To prevent the original point position from being altered due to accidental operation, it can

Lock in ORIGIN (Origin Setting) and ZERO (Zero Setting) features

Zero) Features.

Automatic Power Supply

Open/Close

If not in use for approximately 20 minutes, the LCD display

The reading on the display will disappear, but the origin is saved.

Adjust the micrometer screw to read the display on the LCD screen.

Reemerging.

Data Output: Equipped with measurement data output terminals, capable of establishing statistics

Process Control Systems and Measurement Systems.

Error Alert: If an overflow appears on the LCD screen or if the calculation

Error, error message appears on the LCD screen.

Measurement function has stopped. This will prevent the instrument from providing incorrect readings.

Misread count. When the battery voltage falls below a certain level, measurement

Low battery voltage alert prior to normal operation.

The signaler will appear to remind users to change the battery.