Japan Magnescale Digital Indicator LH71-3_SupplyPro Co., Ltd.

Japan Magnescale Digital Indicator LH71-3

High-performance counters for milling and turning applications

Milling and turning machine counters
Resolution Switch
Machine Error Compensation
Data Storage
Reset/Default
Calibration Length Component Origin
Programming Features
Multiple basis points
Set Target
Milling Machine Features (Bolt Hole Circumference / Simple R profiling)

Main Specifications
Model	LH71-1	LH71-2	LH71-3
Show	Display 7 digits and negative numbers
Connectable measuring component	GB-ER, PL20C, SJ700A (Direct) / DG-B ( Requires additional conversion adapter)
Measurement component input resolution	Standard: 0.1μm, 0.5μm, 1μm, 5μm, 10μm, 1s, 10s, 1min, 10min Expansion: 100μm, 50μm, 25μm, 20μm, 2μm, 0.05μm, 1 degree can be added
Display Resolution	Measure component input resolution or higher, as well as dual display (excluding angle display)
Input Signal	A/B phase (pulsed) signal, Z signal
Small phase difference	100ns
Quantized error	±1 count
Alert displayed	Length measurement component not connected, overspeed, exceeded large display limit, power failure, error saving data
Reset	Reset via push-button switch
Pre-set	Save/Call 3 Types of Values
Origin Detection Function	Determine the origin of the measurement component, which can reproduce the reference point (when connecting the measurement component with the origin)
Data Storage	Preserve display values and various settings during power outages
Linear Compensation	Compensate the count value for the length measuring component. Compensation Quantity Standard: ±600um/m (Extended: ±1000um/m)
Interval Error Compensation	The moving range of the component with the dot measurement can be divided into 32 sections. Each component is capable of error compensation; Compensation value: ±600um (per component)
Place Order	Magnification: 0.100000 – 9.999999
Programming	Programming of processing coordinates is available (program steps: typically 850) Manual programming via push-button switch 2. Automated programming through playback 3. Runtime Image 4. Fixed loop insertion available (bolt hole circumference, thread holes, simple R profiling)
Angle Display	Apply the magnetic encoder tape to the curved surface and input the diameter and resolution of the tape, and it will be displayed as an angle value.
Dormant	If there is no action within a specified period, the display will disappear (the time can be set).
Power Supply	DC 12V, rated 0.75A, max. 1A, AC 100-240V ±10% When using the AC adapter PSC-23A (for Europe and other countries) *Optional
Power Consumption	Max. 32VA (Connected to AC adapter)
Operating Temperature Range	0 ~ 40°C (No condensation allowed)
Storage temperature range	-20 to 60°C (No condensation)
Quality	Approximately 1.5 kg

Select General Application or Milling Function (set to "General" in the Basic Model Selection Mode)
Model	LH71-1	LH71-2	LH71-3
Display shaft	1 shaft	2-axle	3-axis
Multiple basis points	150
Bolt hole circumference	–	Show coordinates for evenly spaced holes on a circle of diameter
Simple R-Processing	–	Display coordinates of simple R processing points
Threaded hole	–	Coordinates for evenly spaced drilling along a straight line

When selecting lathe specifications (set "lathe" in the basic model selection mode)
Magnescale reserves the right to modify product specifications without prior notice.
Model	LH71-3
Axle Display	2-axis display (2-axis or 3-axis input)
Tool Positioning	99
Length measuring component input addition	It features 2-axis addition display.
Display Maintained	Maintain display value and input tool coordinates

主题 *
内容 *
Your company's名
Contact person *
ContactPhone *
电子Email
验证码
点击确定代表您同意《服务条款》《隐私政策》

Japan Magnescale Digital Indicator LH71-3

Business Card

买家正在看

High-performance counters for milling and turning applications