Product Details
价 格Negotiable
最小起订0 piece库存0 piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Mitutoyo SAE Microscope Caliper 1
Negotiable
Mitutoyo Sanwa Three-Jaw Type Bor
Negotiable
Rational Wanhao High-Precision Pr
Negotiable
Mitutoyo 3D Tram 505-732
Negotiable
Mitutoyo Sumitomo Short Arm Insid
Negotiable
Mitutoyo Mitutoyo Standard Gradua
Negotiable
Japan Magnescale Digital Indicato
Negotiable
Mitutoyo Quick Lever Caliper 523-
Negotiable
Japan Magnescale Reading Head PL1
Negotiable
Mitsubishi Signal Output Digital
Negotiable
Japan Magnescale Displacement Sensor DT512P
Good environmental resistance: Equivalent to IP64 (Type P)
Measurement Range: 12mm, 32mm
Resolution: 1µm, 5µm
Accuracy: 6µm p-p, 10µm p-p (varies due to measurement length and resolution)
Supports φ8mm central control pipe installation and side installation via M4 screws
Oil-resistant and excellent dustproof performance
Available with pneumatic actuation for the main shaft via an air-powered extrusion type (only for 32mm models. 12mm models require optional products).
| Main Specifications | |||||
|---|---|---|---|---|---|
*1 Connect to MT20 Changes to the content will be made without prior notice. | |||||
| Model | DT512N | DT512N-T10 | DT512P | DT512P-T10 | |
| Spindle Drive Method | Spring Extrusion Type (Can be pneumatically extruded using Attachment DZ176) | ||||
| Measurement Range | 12mm | ||||
| Resolution | 1μm | ||||
| Measurement Force (at 20℃) | Upward | 0.7±0.5N | 1.7N or lower | ||
| Horizontal | 0.8±0.5N | 7N or lower | |||
| Downward | 0.9±0.5N | 1.7N or less | |||
| Accuracy (at 20℃) | 6µm p-p | 3µm p-p*1 | 6µm p-p | 3µm p-p*1 | |
| Operating Temperature Range | 0 ～ 50℃ | ||||
| Storage Temperature Range | -10 ～ 60℃ | ||||
| Output Cable Length | 2m | ||||
| Central control pipe diameter | φ8 0‒0.015mm | ||||
| Probe | Steel ball φ3mm (M2.5p×0.45 tensioned screw) | ||||
| Quality *2 | Approximately 75g | Approximately 80g | |||
| Protection Level | ― | Comparable to IP64 | |||
Phone Consultation