



价 格Negotiable
最小起订0 piece库存0 piece
Mitutoyo Sinebar Inner Diameter G
Negotiable
Mitutoyo's 422-260-30 Straight-Re
Negotiable
Japanese Magnescale Caliper Senso
Negotiable
Mitutoyo SPC 526-163-21 Internal
Negotiable
Mitutoyo Sine-Maiko Three-Jaw Qui
Negotiable
Mitutoyo Standard Internal Microm
Negotiable
Mitutoyo Trimos Digital Height Ga
Negotiable
Mitutoyo Sanwa Cooling Liquid Cal
Negotiable
Mitsubishi High-Performance Type
Negotiable
Mitutoyo Sumitomo Short Arm Insid
Negotiable
Japan Magnescale Displacement Sensor DK10PLR5


Measurement Range: 10mm, 25mm, 50mm, 100mm, 155mm, 205mm
Resolution: 0.5 μm
Accuracy: 2μm p-p to 6μm p-p (varies by model)
Dustproof, drip-proof, and oil-resistant structure. Good environmental resistance (Type P).
High Measuring Force (DK10/25/50/100P models): 4.9 ~ 9.3 N (varies by model)
Low measurement force (DK10/25/50/100N models): 0.3 ~ 2.7 N (varies by model)
With the included magnetic吸附式测头, it can be attached to the moving platform for measurement (DK155 / 205).
Built-in origin
Output Signal: A/B phase (pulsed), Origin (differential line driver signal with output voltage difference)
| Main Specifications | ||||
|---|---|---|---|---|
※1 Resolution settings are required when connecting to the LT30 series, MG series, and LY70 series. Please refer to the respective user manuals for details. Changes to the content will be made without prior notice. | ||||
| Model | DK10NR5 | DK10PR5 | DK10PLR5 | |
| Output | Output A/B/Z differential line driver signals (compliant with EIA-422) | |||
| Resolution※1 | 0.5μm | |||
| Measurement Range | 10mm | |||
| Accuracy (at 20℃) | 2μm p-p | |||
| Measurement Force (at 20℃) | Upward | 0.3 ±0.25 N | 4.9 N or less | |
| Lateral | 0.6 ±0.3 N | 4.9 N or less | ||
| Downward | 0.8 ±0.35 N | 4.9 N or lower | ||
| Origin | 1. At a position of main shaft movement ±0.5mm from 1mm | |||
| Response Speed | 250m/min | |||
| Vibration-resistant | 150m/s2 (10 ~ 2000Hz) | |||
| Impact-resistant | 1500m/s2 (11ms) | |||
| Protection Class | IP50 | IP64 | ||
| Operating Temperature Range | 0 ~ 50°C | |||
| Storage Temperature Range | −20 ~ 60°C | |||
| Power Voltage | DC +5V ±5% | |||
| Power Consumption | 1K or less | |||
| Output Cable Length | Approx. 2.5 meters | |||
| Central control pipe diameter | φ20 0‒0.013 mm | |||
| Quality ※2 | Approximately 230g | |||
| Measurement Head | Super-hard spherical DZ-122 (mounted with M2.5 screws) | |||
| Accessories | Instruction Manual, +PM4 x 5 screws (2 pcs) | |||

Phone Consultation