There is no unified quality certification system for waste bins in China, and quality assurance standards are generally based on industry or corporate standards.
The following is for your reference only.
Q/FS
Q/FS2008-001
Composite Material Fruit Skin Bin Products
May 30, 2008; Implemented on June 1, 2008
Composite Material Fruit Waste Bin
Q/FS2008-001
Scope:
1. This standard specifies the quality requirements for our company's composite material fruit bins.
Section 2: This standard does not apply to customer-specific requirements for outsourced processing products. If the customer has special requirements for a certain indicator, then the customer's requirements shall be the standard.
II. Reference Standards:
The provisions contained in the following standards are incorporated into this standard by reference within it. All standards are subject to revision, and when using this standard, the possibility of utilizing the new versions of the following standards should be explored.
GB1447-83: Test Methods for Tensile Properties of Glass Fiber Reinforced Plastics
GB1449-83: Test Methods for Flexural Properties of Glass Fiber Reinforced Plastics
GB2828-87: Inspection by lot sampling and sampling tables for counting (Applicable to inspection of continuous lots)
GB3854-83: Test Method for the Barcol Hardness of Fiber Reinforced Plastics
GB/T8924-88: Test Methods for Combustion Performance of Plastics, Oxygen Index Method
GB1463-88: Test Methods for Density and Relative Density of Fiber Reinforced Plastics
GB2557-89: Test Method for Resin Content of Fiber Reinforced Plastic Resin
GB/T 3295-96: Surface Glossiness Test Method
GB1451-81: Impact Test
ASIMGB395: Forced Aging Test
CIELAB: International Commission on Illumination Colorimetry Test
Section 3: Product Structure - As per actual product samples
Section 4: Technical Specifications
1. Appearance: The outer surface is free of scratches, stains, bubbles, and features even coloration.
2. Technical Performance: Shall comply with all the requirements specified in Expression 1.
Section V: Testing Methods
Table 1
Serial Number Inspection Item Test Method Company Standard Remarks
1. Self-Extinguishing: Dispose of burning cigarette butts in the bin
2. The 100oC boiling water placed in a φ200 metal container, after the product surface temperature drops to room temperature, there is no cracking or bubbling on the surface coating.
Surface Anti-Aging Layer Thickness: Caliper measurement, not less than 0.5mm
4. Structural Layer Thickness - Caliper Measurement: Greater Than 2mm
5. Inner Shell Lamination | Combustion Test | Not Less Than Three Layers
Impact Resistance: 100kg steel ball dropped freely to impact 5 times without any cracks.
7 Metal accessory components thickness, caliper measurement greater than 1.2mm
Section 7: Inspection Rules:
1. Products are packaged in batches of 500; batches with less than 500 units are also considered a batch.
Samples should be representative, with 3 units randomly selected from each batch for inspection.
Section 8: Product Packaging
Each product is individually packaged with bubble wrap.
Section 9: Storage and Transportation:
During storage and transportation, extreme caution should be exercised.
News Center Co., Ltd.
