The complementary control software ensures that the喷射器 remains in an energy-saving state throughout the cleaning process. The Myuan-ZXP intelligent喷射器 comes in two types: rotatable and non-rotatable. Both are equipped with a pump and nozzle assembly, with the difference being that the Myuan-ZXP-R can jet within a 270° range, while the Myuan-ZXP-S is fixed within a specific range. The Myuan-ZXP intelligent rotatable喷射er offers a wider cleaning coverage area.

Primary Application:

Intelligent flushing aeration equipment, specifically designed for rainwater retention ponds, utilizes a gas-liquid mixing device to aerate, stir, and flush wastewater containing sludge within the pond, preventing environmental pollution.

Effective cleaning and stirring of rainwater retention basins, box culverts, and corridors. After the water in the retention basin is drained, the bottom of the basin is flushed. It can perform both automatic flat washing and spot washing.

Equipment Composition:

Rotary Motors and Submersible Sewage Pumps, Level Gauges

The rotating motor power ranges from 400 to 1000 watts, while the submersible sewage pump motor power is from 4 to 15 kilowatts.

Submersible pumps and rotating motors are both available.Please provide the Chinese content to be translated into American English.Automatic Conversion Feature

Submersible pumps and rotating motors both feature fault alarm functions.

Submersible pumps feature ultra-low float ball protection.

Sequence of Startup: The submersible pump must be running smoothly before the rotating motor can be started.

Level Gauge Levels: Real-time level H, Stirring start level H1, Stirring stop level H2, Washing start level H3, Washing start/stop level H0; All levels except the real-time level can be manually set and displayed on the touch screen.

In automatic mode, the submersible pump activates when the liquid level drops to H1, at which point the rotating motor remains at the zero position (optional, rotating or stationary, default stationary); the pump stops when the level drops to H2; and when it reaches H3, after the pump starts, the rotating motor (optional, rotating or stationary, default rotating) rotates left from zero position by φ1 degrees (optional, not exceeding 135°), then rotates right from zero position by φ1 degrees (optional, not exceeding 135°). After completion, the rotating motor returns to the zero position.

In manual mode, the touchscreen features left and right rotation buttons, as well as a rotation degree input box, allowing for manual rotation to flush and adjust speed.