T Code Error

Oil Level Low

SPINPLE FAULT (Main shaft failure)

Spindle Alarm

EXTERNAL EMG STOP (Emergency Stop button activated)

AC NOT READY

SPINPLE LUBE FAULT

T Code Error (Invalid T Code)

M Code Error (Invalid M Code)

SERVO NOT READY

NC NOT READY

Turret Fault

Turret Limit

DC 24V OPEN

+24V NOT READY

GRAR Drift

Please axis return to home.

Please Return Tool Magazine to Zero Position (Tool Magazine Not Returned to Zero)

Air Pressure Failure

UNCL Tool Fall (Failed Cutting Tool)

Air Pressure Drop

Clamp Tool Failure

DRUM NOT PARKED

X Axis Not Zeroed

Y Axis Not Zeroed Out

Z Axis Not Zeroed

4th Axis Not Zeroed Out

X-Axis Overtravel

Y-Axis Overtravel

Z Axis Overtravel

Counter Switch Error

MASTERT TRANSFER OVERHEAT

Z-Axis Not at First Reference Position

Spindle Orientation Failure

Tool Data Error

Please remove the tool from the spindle on Springelk.

Please load the tool on the spindle.

Axis Unclamp Failure (A-axis Unclamp Failure)

Axis Clamp Failure

DRUM OUT TO APRonDLEIS FALL: Blade Library Orientation Change Failure

MG Swing Overload

DRUM BACK PARK FALLS (Failed to Return Drum to Original Position)

Turrent Motor 1 Overload

Coolant Motor Overload

DRUM ATC Fault (Automatic Tool Change Failure)

TOOLS UNLOCKED

Battery Alarm

DRUM POSITION SWITCH ERROR

DRUM NOW NOT IN ORIGINAL PARK POSITION

IT DANGOU: DRUM LOCKOUT (Drum Unavailable)

Pot UO Failor Pot Not in Upper Position

POT DOWN ACTION FAILED

ARM MOVEMENT IS PROHIBITED

The spindle status is error.

Arm Motor Failure or Arm Switch Malfunction

Centrefeed Lubrication Failure

THE WORK NOT CLAMPED

AUTO TOOL CHANGE ERROR

Tool Data Out of Range

The Order Tool Now on Spindle

Three-Spindle Switch Fault (Approach Switch on the Main Spindle)

The Centre Coolant Level is Low

DRUM RETURN 1# POSITION FAULT (Automatic Drum Zeroing Failure)

Spindle Overload

Current Motor Overload (Cutting Wheel Motor Overload)

CHIP ConVEYER OVERLOAD

Hard Limit or Servo Alarm

NO LUBRICANT OIL