When selecting a product, the most intuitive way to understand it is to look at its label—this applies to products across all industries, not just cooking oils. Labeling is an indispensable process in the product processing industry. In the past, with low productivity, many people chose to label manually. However, as technology advances rapidly and the demand for various products continues to increase, the labeling process has become increasingly automated. Today, I'll introduce you to common malfunctions of automatic labeling machines and adjustment tips.

No content provided.

1. The object's electrical eye position is incorrect; adjust the position of the electrical eye.

2. Detected a fault in the electrical eye, replaced the eye.

3. The labeling head label pull is not tight enough; adjust the paper pull.

4. System malfunction detected; investigating the cause of the issue.

5. The header power supply was not connected; now connected.

Continuous Labeling

1. The label's eye position is incorrect; adjust the eye position.

2. Tag eye malfunction, adjust or replace the tag eye.

Labeling axis position is inaccurate

Label head stripping plate is not properly positioned; adjust the handle.

Labels are not positioned correctly on the labeling head; please adjust the label placement.

Labeling Position Imprecision Before and After Sticking

1. Adjust the front and rear positions of the detection eye or adjust the labeling delay.

Label Unavailable

1. The bidding speed has been increased to address the previously slow bidding process.

2. Increase the length of reserved tags;

3. The bidding speed is too fast; reduce the bidding speed.

4. The object's electrical eye is too far from the exit point.

5. Adjust the conveyor belt speed to increase the spacing.

6. Poor label adhesion or a dirty surface to be labeled.

Label Wrinkles After Application

1. Reduced the reserved tag length due to excessive length.

2. The sending speed of the label is too fast compared to the relatively slower tape speed; adjust both to match the pace.

Incorrect Labeling

1. The object's electrical eye sensitivity is subpar; adjust to an appropriate level of electrical eye sensitivity.

2. Slow labeling speed or too fast conveyor belt speed.

Label backing paper loosened

Labeling speed is slower than the conveyor belt speed.

Automation equipment is easy to use, but it's crucial that everyone adheres to the operational procedures; otherwise, even the best machinery can be compromised. Additionally, machine maintenance is vital, as it not only extends the lifespan of the equipment but also reduces the occurrence of malfunctions.