The JN bullhead typically consists of square plastic sockets and neatly arranged square pins. The difference between connectors and JN bullhead connectors is that the bullhead removes the snap packages on both sides.

Jian Niuniu Angle, as the name suggests, is a simple connector.

In compliance with specifications, the peripheral dimensions of the small connectors typically come in three sizes: 1.27 pitch, 2.0 pitch, and 2.54 pitch. The diameter of the pins used in the four-note chords also varies accordingly. Moreover, the contact between the bottom PCBs can be designed as SMT surface mount or 180-degree DIP insertion.

Function: After welding onto the PCB, connect the IDC cable of the corresponding specification, then connect the circuit according to the requirements of the other circuit configuration designer. Typically used for transmitting control signals and weak currents.

The Jinniu cow horn connector is simply composed of a rectangular plastic socket and numerous neatly arranged pins. The cow horn connector extends two horns at both ends, resembling the two horns of a cow, hence the name "cow horn connector."

The Application Principle of JianNiuniu Angle: After welding it onto the PCB, connect the IDC cable of the specified specification, and then link the circuit according to the requirements of the circuit configuration designer. It is commonly used for transmitting control signals and low-voltage power.

Physical properties: 3360 spacing at 1.27mm, 2.00mm, 2.54mm (optional): Pins 4P, 6P, 8P, 10P, 12P, 14P, 16P, 20P, 24P, 26P

Angle embedded at 180 degrees, bending at 90 degrees.