Product Dimensions:

During transportation, each company's products vary in shape and size, so custom wooden crates are tailored according to the product dimensions. During the measurement process, detailed records of the actual dimensions and stress point locations of the goods should be made. For instance, if possible, take photos of the product's appearance or draw a sketch of its exterior. Mark the stress point locations to better design the wooden crates.

Also, be mindful of the need to transport goods in custom wooden crates. If transportation is required, consider the height and width limitations of trucks, trailers, flatbeds, and containers. When loading containers, it's generally not to exceed the external dimensions of the wooden crate. If exceeding 2.35 meters, for domestic transportation on flatbed trucks, the external height of the wooden crate cannot exceed 3 meters, and the width cannot exceed 2.5 meters.

2. Product Weight:

The weight of the goods determines the structural design of the custom wooden boxes. For goods weighing less than 3 tons and less than 2 meters wide, most are handled by forklifts. For goods wider than 2 meters and heavier than 3 tons, it may not be possible to use forklifts, and cranes are required to lift them. Therefore, this consideration must be factored into the wooden box design process. When using a loader to scoop earth, the force of the custom wooden box is on the chassis. When lifted by a crane, both the box panels and the chassis are subjected to force.

3. Box Selection:

Custom wooden boxes are typically made from solid wood, plywood, particleboard, packaging material tubes, etc. When selecting materials, budgeting for the amount and duration of materials needed is essential. The boxes must be sturdy and are usually disposable. Therefore, the choice of wooden boxes is based on superior material properties, adequate supply, low cost, and ease of processing, among other primary selection criteria.

4. Protective Packaging:

During the process of packaging wooden boxes, many customers require manufacturers to implement protective measures for the external goods during the customization of wooden boxes, such as protection against rain, moisture, rust, and impact. The wooden box packaging will utilize protective materials such as EPE, bubble wrap, shrink wrap, foam board, and waterproof plastic.

5. Box Specifications:

Create a design sketch for a custom wooden box. If possible, indicate the box's length, width, and height, and list the design specifications.