The temperature's impact on machinery is quite significant. Normally, when applying lubricating oil to the XXY alignment platform, it's important to avoid using too much oil, otherwise, it can easily lead to high temperatures, causing damage to the machinery.
System temperature has a critical impact on the main raw materials of the XXY alignment platform. When the temperature exceeds 100℃, the additional load and operating time of the XXY alignment platform will significantly decrease. At this point, the dynamic and static additional loads are measured by the scale list values multiplied by the corresponding temperature coefficient. The company has obtained the corresponding conclusions and principles of the method. Statements regarding the handling of replacement lubricating oil for the XXY alignment platform.
Under heavy resistance, it's necessary to clean the product. Wipe it with a cotton cloth, and after cleaning, use WD40 as an auxiliary cleaner to remove foreign matter from the edges.
After cleaning, gently move your hand along the edge towards the same target, observing for any friction on the product. Pay attention to any bristles felt on your fingers; it might be that the XXY alignment platform is causing friction. At this point, gently encourage the movement and observe if there is increased resistance or if it's quite difficult to push. In cases of high resistance, it is necessary to replace it immediately.
During the cleaning of the motor, pay attention to the presence of small ball bearings inside. If any are found, the XXY alignment platform must also be cleaned thoroughly and the slider replaced.
(4) Gently facilitate the sliding motion and listen for sounds. If the collision sound is loud, a replacement is necessary.
(5) Monitor the air gap between the stator and rotor of the motor; ensure they are aligned front to back. Misalignment can simply reduce the operational time. The XXY alignment platform will require tuning and adjustment upon its arrival.
Therefore, when storing grease for a long period, it should be kept in a dry and well-ventilated environment, avoiding exposure to sunlight on the XXY alignment platform. Regular inspections should be conducted to check for any changes to ensure its quality and usability.
