Compared to traditional plaster:

High strength: The high polymer plywood is 10 times stronger than gypsum bandages, with good flexibility and shock resistance, effectively protecting the affected area.

2. Lightweight: Weighs only 1/6 of gypsum and 1/4 of its thickness, significantly reducing the burden on human movement.

3. Fast curing: High molecular weight plywood begins to cure after 3 minutes of immersion in water, can bear weight in 10 minutes, saves time, convenient for patients.

4. Enhanced Breathability: High molecular sandwich mesh structure, offering superior breathability, effectively preventing skin itching, odor, and infections.

5. X-ray Transparency: Excellent X-ray penetration, allowing for clear observation of fracture line healing, facilitating clinical assessment of recovery.

6. Easy to Use: Forms a solid upon contact with water molecules, featuring simple, quick, and hygienic clinical operation.

Product Usage Instructions:

1. Open the product package and remove the appropriate model of the spacer.

2. Soak the plywood in room temperature water for 3-4 seconds or pour about 200ml of room temperature water into the middle layer of the plywood, squeeze out the water, and dry off any excess with a dry towel.

3. Secure the thick layer of the plywood to the area that needs to be fastened by wrapping it with gauze bandage, ensuring a moderate tension.

4. Molding Plates for Close Fit with Limbs

5.3 minutes to start curing, 20 minutes to bear weight