For industries like machinery, the issue of electric shock is certainly of great concern, and the same applies to automatic nailing box machines. We should not operate the switches, buttons, and dials of the automatic nailing box machine with wet hands to prevent electric shock. Below are some key points to note in order to prevent electric shock in automatic nailing box machines:

Ensure the power supply of the automatic nailing box machine is properly grounded.

Do not replace electrical components while they are powered on; otherwise, danger may occur.

Do not operate the automatic stapler machine's switches, buttons, and dials with wet hands to prevent electric shock.

Do not open the door of the distribution box, the housing, or the shells of various electrical components when powered on or in operation; otherwise, electric shock may occur.

5. Do not damage the cables or wires, apply excessive stress to them, or use them to bear heavy loads or clamp them down. Otherwise, electric shock may occur.

6. Inspection and regular maintenance should be performed by professional technicians. For inspection or regular maintenance, please disconnect the power source, and after 10 minutes, proceed with the test using a multimeter or similar device to ensure the remaining voltage has dissipated. Otherwise, electric shock accidents may occur.

Do not operate the automatic nailing machine with the main power switch on when the electrical distribution box door is open; otherwise, you may come into contact with high-voltage terminals and cause an electric shock. Even when the power is off, do not randomly open the door of the electrical distribution box except for repairs and regular maintenance. Keep the interior of the box free of all clutter and clean.