Jiangsu Blue Plastic Pallets - Factory Direct - Plastic Pallet Specifications - Xinyi

Product Specifications Comparison Chart

                                           Manufacturer Overview - Case Introduction

Automated assembly line operations

                     Trolley maintenance and care注意事项

Section outlines the necessary precautions to ensure long-term and safe use of plastic pallets during actual operation, strictly prohibits unauthorized operation, and hopes that the user adheres to the following requirements for proper operation and use:

Avoid exposing plastic pallets to direct sunlight to prevent aging and extend their service life.

b. Absolutely no throwing goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly, avoid concentrating in one area, and do not stack off-center.

c. Strictly prohibited from dropping plastic pallets from heights or throwing them from low to high, to prevent breakage or cracking due to severe impact.

d. During the use of forklifts and hydraulic trucks with pallets, the distance between the forks should be widened as much as possible to the outer edge of the pallet's fork entry. The fork insertion depth should be more than 2/3 of the entire pallet depth. In actual operation, maintain a consistent speed for forward and backward as well as up and down movements, avoiding sudden stops or sharp turns to prevent damage to the pallet and potential collapse of goods. The forks must not strike the side of the pallet to avoid breaking or cracking it.

e. When stacking on pallets, ensure the goods are evenly arranged to distribute the load evenly on the bottom of the pallet, thereby preventing excessive deformation and potential cracking. When placing the pallet on the shelf, keep it level on the shelf beams, with the length of the pallet exceeding the outer diameter of the shelf beam by at least 50mm.

2. Pallet storage environment and usage conditions

Users must comply with laws and regulations related to safe production and ensure product quality. Unauthorized operations are strictly prohibited during actual operation. To ensure long-term and safe use of plastic pallets, it is requested that plastic pallets be stored and used correctly according to the following requirements:

1. Plastic pallets should be kept out of direct sunlight to prevent plastic aging and extend their service life.

2. Absolutely no dropping goods from heights onto plastic trays. Determine the stacking method of goods on trays reasonably. Place goods evenly, avoiding concentrated stacking or off-center stacking.

3. Strictly prohibit dropping plastic pallets from a height or throwing them from a low level to a high one, to prevent damage such as breakage or cracking due to violent impacts.

4. Use steel pipe plastic pallets in a dry environment.