One: Requirements for the铺设site

The installation of anti-static flooring should be conducted after the completion of indoor civil construction and decoration work.

2. Prior to laying anti-static flooring, the ground should be kept level, dry, free of debris, and dust-free.

Prior to installing static-dissipative flooring, ensure that all cables, electrical circuits, water lines, air ducts, and HVAC systems beneath the floor have been completed.

Before laying anti-static flooring, ensure that the installation of the base for large heavy equipment is complete, with the equipment mounted on the base. The height of the base should be consistent with the finished height of the surface of the anti-static flooring.

5. The construction site for anti-static floor installation should be equipped with a 220V/50Hz power supply and water source.

Anti-static Floor Installation Tools

1. Cloud stone cutting saws, pistol drills, hammers, hand grinders

2. Laser Level Meters, Network Laser Scanners

3. Bubble Level, Ruler, Chalk Line

4. Suction Plates, Nut Wrenches, Cross Screws

5. Vacuum cleaners, brooms, mops

Step 3: Static-Dissipative Flooring Installation Procedure

Thoroughly inspect the ground levelness and wall perpendicularity. If any significant defects or areas requiring local renovation are found, report them promptly to the relevant department of Party A.

2. Level the horizon by marking the installation height of the static-dissipative flooring with a chalk line onto the wall, ensuring that the laid flooring is all on the same level.

3. Choose the right benchmark position, measure the room's length and width accurately, and lay out the grid lines for the installation brackets on the floor to ensure the anti-static flooring is neatly and aesthetically laid, while minimizing the need for floor cutting.

Adjust the brackets to be at the same required height for installation, and position the saddle at the cross point of the ground grid lines.

Step 5: Secure the beam to the bracket using mounting screws. Then, use a level and a square ruler to individually align the beam, ensuring it is on the same plane and perpendicular to each other.

6. Apply anti-static flooring using a vacuum plate on the assembled beams.

7. If there's leftover space less than the length of the static-dissipative flooring near the wall, the flooring can be cut and patched together.

8. During flooring installation, use a water bubble level to even each piece. The height of the static-dissipative flooring is adjusted using adjustable brackets. Handle the flooring gently to prevent scratching and damaging the edges. Clean as you lay the flooring to avoid accumulating debris beneath the static-dissipative surface.

When setting up heavy equipment in the server room, add brackets under the anti-static floor beneath the equipment base to prevent deformation of the anti-static floor.

If the antistatic flooring requires cutting or opening, drill 6-8 holes with a drill at the corner of the opening to prevent the decorative surface of the antistatic flooring from cracking after processing.

Anti-static Floor Principle

In fact, static-dissipative flooring should be referred to as electrostatic dissipative flooring. It is a device that connects the ground to the static electricity generated in the workplace. Its principle of operation involves using a special layer on the floor surface to dissipate static electricity into the ground, thereby reducing or eliminating the charge.No content provided.Static interference is minimized, thereby reducing some unnecessary losses.