Filter Core - Blade-type Separator Combination

Filter Core - Blade Assembly Separator

Effectively remove liquids, solid particles, and dust simultaneously from a vast array of different industrial gases.

1. Gases carrying liquids, solid particles, and dust enter the filter core from the outside. Solid particles and dust are removed during this process.

Simultaneously, small droplets are also aggregated into larger droplets while removing large-sized droplets.

2. Gas carries larger liquid droplets, which aggregate together, into the vertical pipe.

3. Secondary separation vanes aggregate into larger droplets for removal. The collected liquid is collected below the vanes.

4. The collected liquid is guided into the separator's bottom by gravity through the conduit, and then discharged from the bottom of the separator.

Design an appropriate liquid seal to prevent gas from entering the conduit, causing a liquid short circuit.

5. Reasonable liquid level control to ensure the bottom liquid is smoothly drained from the separator, while maintaining a liquid seal in the conduit.

Filter Core — Illustration of Operation Diagram for Blade-Type Separator with Separation Principle

Vertical Filter Cartridge - Blade Assembly Separator

Horizontal Filter Cartridge - Blade Assembly Separator

Horizontal Filter Cartridge - Blade Assembly Separator Physical Case

Performance Warranty:

Remove droplets larger than 8um in diameter

2. Removal of 0.5-8um liquid droplets to achieve 99.5% purity

3. Remove solid particles and dust with a diameter of 1um and above

4. Removal of 99.5% of solid particles and dust between 0.5-1um

Typical Applications:

1. Compressor Station

2. Natural Gas Pipeline System

3. Natural Gas Collection and Peak Shaving Stations

4. Power Plant

5. Refining,石化, and chemical production facilities