Hubei Aerodynamic Mixed Flow Tower

Hubei Aerodynamic Mixed Flow Tower

Shandong Zhongcheng Liangchuang Environmental Protection Technology Development Co., Ltd. has been committed to the design, research and development, and production of coating products and environmental purification products for a long time. The company boasts strong technical capabilities, advanced processing equipment, exquisite craftsmanship, comprehensive testing methods, and a sound quality assurance system.Certificate System.

Vortex TowerApplication Fields:

Wet polishing dust extraction, paint spray waste gas pretreatment, boiler dust removal, smelting furnace black smoke waste gas pretreatment, industrial smoke pretreatment, and other industrial waste gas pretreatment

Design of the Cyclone TowerPrinciple

Turbulent TowerThe design utilizes the centrifugal force of the cyclone separator to separate large particles and fibrous matter from the dust, which then fall from top to bottom into the dust collection box. Some light, fine dust particles are then directed through the top pipe into the water-washing cyclone tower, where they are flung against the tower wall due to centrifugal force and fall into the flowing absorbent liquid from top to bottom. As the dust particles pass through the cyclone tower plates at high speed, the absorbent liquid on the blades is blown into tiny droplets. Through mechanisms such as collision and interception, dust particles, absorbent liquid, and droplets collide with each other.Particle size continues to increase. Under the guidance of the cyclone tray plate, the rotational motion intensifies, generating strong centrifugal force. Dust particles easily detach from the exhaust and are flung towards the tray wall, where they are gravity-driven to the bottom of the tower, achieving gas-solid separation. For the fine dust particles in the exhaust, not all can be captured after passing through the tray plate; some particles escape. As these particles pass through multiple tray plates, they coalesce, increasing in mass and are then captured and separated. They then enter the upper multi-sided sphere adsorption filter layer for dehydration. Due to the large surface area of the multi-sided spheres, the adsorption capacity is strong. The filtered gas is then discharged outdoors through a vacuum blower.