Tianjin Square Cyclone Tower Custom Sizes

Tianjin Square Cyclone Tower - Custom Sizes Available

Shandong Zhongcheng Liangchuang Environmental Protection Technology Development Co., Ltd. has been committed to the design, research and development, and production of coating products and environmental purification products for a long time. The company boasts strong technical capabilities, advanced processing equipment, exquisite craftsmanship, comprehensive testing methods, and a sound quality assurance system.Certification System.

Vortex TowerApplication Fields:

Wet polishing dust removal, paint spray waste gas pretreatment, boiler dust removal, smelting furnace black smoke waste gas pretreatment, industrial smoke preprocessing, and other industrial waste gas pretreatment

Design of the cyclone towerPrinciple

Turbulent TowerThe design utilizes the centrifugal force of the cyclone separator to separate large particles and fibrous materials from the dust, which then fall into the dust collection box from top to bottom. Some light, fine dust particles are then carried through the top pipe into the water-washing cyclone tower, where they are flung towards the tower wall by centrifugal force and collected by a flowing absorbent liquid from top to bottom. As the dust particles pass rapidly through the cyclone tower plates, the absorbent liquid on the blades is blown into tiny droplets. The dust particles, absorbent liquid, and droplets collide and intercept each other due to mechanisms such as collision and interception.Particle size continuously increases. Under the guidance of the cyclone tray, the rotational motion intensifies, generating strong centrifugal force. Dust particles easily detach from the exhaust gas and are thrown towards the tray wall, flowing to the bottom of the tower under gravity to achieve gas-solid separation. For the fine dust particles in the exhaust gas, it is impossible to capture all of them after passing through the tray. Some dust particles escape. After passing through multiple trays, the fine dust particles coalesce, increase in mass, and are then captured and separated. They then enter the upper multi-faceted sphere adsorption filtration layer for moisture removal, as the multi-faceted spheres have a large surface area and strong adsorption capacity. Finally, the filtered gas is discharged outdoors through a vacuum fan.