Supply Olympus MagnaFORM weld and near-surface eddy current array detector

MagnaFORM for weld inspection, OMNISCAN MX eddy current array

MagnaFORM Scanner: Faster completion of weld and stress corrosion cracking detection

The MagnaFORM scanner can reduce the time required for weld inspection and stress corrosion cracking (SCC) detection, offering a quick and reliable method. The scanner's design is aimed at speeding up the weld inspection process with the following features:

• Inspection through the paint layer; no need to strip the paint and repaint.

• Utilize the dynamic removal compensation feature to inspect extremely rough welds and corroded surfaces.

• Inspection of weld seams through a single scan, saving time.

• Effective detection of stress corrosion cracking

• Assess the depth of surface crack damage

• Intuitive data archiving and imaging operations

  
  
  

  ---

  
  

Saved time and reduced costs

Unlike conventional methods for weld and stress corrosion cracking detection, which require the removal of paint prior to inspection and repainting after inspection, the MagnaFORM ECA solution can...Through the paint layerPerform inspections. Therefore, there is no need to strip and repaint.

The MagnaFORM scanner can perform a single scanInspect entire weld seam surfaceThis helps to reduce detection time. Linear and transverse defects can be detected in the heat-affected zone (HAZ), fusion line, weld cap, or gaps.

Inspect welds with a single scan method.

Inspect very rough welds and corroded surfaces

Dynamic Withdrawal CompensationThe feature can detect extremely rough welds and corrosion areas, ensuring high sensitivity of the probe to surface cracks, thereby facilitating the user's interpretation of data. All channels can be subject to real-time lift-off compensation while maintaining the same sensitivity.

Inspectors utilizing the MagnaFORM scanner can determine the nature of stress corrosion cracks in severely corroded areas. Available forManual or Electric ScannerTo simplify the testing operation and ensure effective scanning of the required areas.

The Dynamic Take-off Compensation feature helps maintain consistent sensitivity and achieve clearer data display.

Intuitive data

Certain conventional testing methods, such as penetration testing, require the user to wait for a period of time before they will color. The MagnaFORM scanner can...Real-time provision of C-scan imagesCustomers do not need to spend time waiting.

User-friendly eddy current software allows operators to assess the depth of surface cracks and save data with just one click.

Colorful, intuitive C-scan images aid in easier interpretation of testing data.