Product Details
Spectrometers, Phased Array, Ultrasonic Flaw Detectors, Endoscopes
产品Price 4500.00/Set
最小起订Quantity：1 Set 供货总Quantity： 10000 Set
Protective Face Probe A protective face probe is a single crystal longitudinal wave contact probe that can be fitted with delay blocks, protective foils, or protective anti-abrasion caps. Advantages and Features: By offering detachable delay blocks, protective anti-abrasion caps, and protective films, the probe is made versatile for a wide range of applications. When used alone (without any options), the epoxy wear-resistant surface offers a high-quality acoustic impedance match with plastic, various composite materials, and other low-impedance materials. The housing features threads, facilitating the installation of delay blocks, protective films, and abrasion-resistant caps. Application: Vertical Beam Defect Detection Thickness Measurement High-Temperature Inspection Flat sheets, billets, bars, and forgings inspection Standard protection face The design of the comfortable sleeve is to facilitate easy gripping and secure handling of the probe while wearing gloves. Standard connector style is right-angle BNC (RB), flat BNC (SB) also available Delay blocks, protective films, and wear-resistant caps are sold separately from the probe. Nominal Chip Size A B C 1.5 1.53 1.75 2.25 1.125 1.53 1.38 1.81 1 1.53 1.25 1.63 0.7 1.53 0.99 1.41 0.5 1.53 0.63 1.19 Offer frequencies of 0.5MHz, 1MHz, 2.25MHz, 3.5MHz, 5MHz, and 10MHz for customer selection. Offering 13mm, 19mm, 25mm, 29mm, and 39mm chip sizes. High-Temperature Delay Block Options *Permitted intermittent contact with hot surfaces* Enhanced near-surface resolution The curved profile of the delay block offers enhanced coupling effects for curved surface detection. Medium temperature delay block (WTD) suitable for room temperature applications Nominal Chip Size Delay Block Fixed Ring 350°F（175°C） 500°F（260°C） 900°F（480°C） inches mm 1 25 DRN-3 WTD-3-x HTD-3-x VHTD-3-x 0.75 19 DRN-4 WTD-4-x HTD-4-x VHTD-4-x 0.5 13 DRN-5 WTD-5-x HTD-5-x VHTD-4-x Recommended Usage Cycle: The longest contact time is 10 seconds, followed by 1 minute of cooling in the air. However, the probe's heating temperature should not exceed 50°C. X = Standard delay block length, available in the following sizes: 13mm, 25mm, 38mm. Please specify detailed requirements when placing an order. Note: For the aforementioned delay blocks, the longitudinal sound velocity of room temperature material, 0.100 in/µsec ± 0.005 in/µsec, can be used as an approximate value for basic calculations. This value should not be used for engineering design calculations. Protective Film Options Enhanced coupling efficiency on rough and uneven surfaces For smooth and clean surfaces, a dry coupling method can be used. Nominal Chip Size Only Protective Film* Protective Film Retainer Ring Set + inches mm 12Zhang's set 60Zhang Suit 1.5 39 PM-1-12 PM-1-60 MRN-1 PMK-1 1.125 29 PM-2-12 PM-2-60 MRN-2 PMK-2 1. 25 PM-3-12 PM-3-60 MRN-3 PMK-3 0.75 19 PM-4-12 PM-4-60 MRN-4 PMK-4 0.5 13 PM-5-12 PM-5-60 MRN-5 PMK-5 * Offer a protective film measuring 36" x 36" x 1/32". Order part number: NPD-665-3101. The set includes 12 films, 1 fixing ring, and C-2 coupling agent. Protective Anti-Wear Cap Options • The nylon abrasion-resistant hat offers an economical solution for applications requiring scanning or scraping on rough surfaces. Nominal Chip Size Protective Wear-Resistant Cap Set inches mm 1.5 39 NWC-1 1.125 29 NWC-2 1. 25 NWC-3 0.75 19 NWC-4 0.5 13 NWC-5
Probe Size (inches)
Phone Consultation