Quality Inspection Core Sampling Leveler, 150-Type Electric Concrete Leveller, Concrete Double-End Face Leveller

Quality Inspection Core Sampling Grinder, 150-Type Electric Concrete Leveler, Concrete Double-End Surface Leveler

Sales Phone: 189-0537-7135, Manager Li

One, the HMP-150 concrete core grinder is mainly used for smoothing the ends of concrete cores.
Quickly flatten core samples with wet grinding, suitable for quality inspection core sample flattening in construction engineering.

HMP-150 Concrete Leveling Machine
 Main Technical Parameters:
Grinding Concrete Core Diameter (mm): 50, 70, 75, 100, 150
Concrete Core Sample Height (mm): 47.5~215MM
Milling Head Diameter: 160mm
End face跳动量：0.10mm
Rated Power: 1700W
Spindle speed of the grinder: 3400 rpm
Rated Voltage: 220V～
Input Power: 1700W
Packaging Dimensions: 630mm x 510mm x 750mm

Section 3: Instructions for Use
Plug in the power and water supply.
Select the appropriate fixture based on the core sample diameter, securely clamp the core sample, and then tighten the fixture after positioning it at the center of the base.
Loosen the upper and lower tension handwheels, turn the lifting handwheel, when the end face of the grinding wheel is at a distance from the end face of the core sample.
Stop at 1mm. Then, tighten the upper handle, open the water inlet valve to allow water flow, and close the power switch to start the grinding wheel. Rotate the handwheel counterclockwise, while turning the fine adjustment wheel clockwise to lower the grinding head. When the face of the grinding wheel contacts the sample face, oscillate the grinding head to grind until the sample face is level.
After grinding is complete, turn off the power and water nozzle valve, then rotate the micro handwheel counterclockwise to its upper limit position.
Loosen the clamp lever, remove the fixture along with the specimen and install it in reverse. Repeat steps 2, 3, and 4 to grind the opposite end face. Continue until the core specimen end face meets the required specifications.

Turn off the power after using the grinder and clean the machine thoroughly.