The hot and humid weather is just around the corner. Along with taking precautions against the heat ourselves, we must also ensure that our water-cooled rotary lobe blowers are protected from overheating. Of course, proper maintenance and care will extend their lifespan. Below, we'll introduce you to these measures.

Water-cooled Roots blowers can experience various malfunctions due to high temperatures during operation. To minimize failures during routine construction, remember these few tips. So, it's crucial not to overlook this knowledge. If you're not familiar with it, it's highly recommended to study it thoroughly. One thing we'd like to remind you is to constantly monitor the water temperature gauge to prevent water loss. In hot weather conditions, it's essential to continuously check the coolant level and pay attention to the water temperature gauge of the water-cooled Roots blower. These aspects are very important, and if not attended to, it could lead to inadequate cooling. Additionally, if the auxiliary water tank is found to be low on water, the operator should immediately reduce the engine speed to cool down before refilling. Otherwise, the desired effect will not be achieved. Also, be cautious not to open the radiator cover immediately to avoid burns. Furthermore, when maintaining the water-cooled Roots blower, it's crucial to prevent the water tank from overheating. This is a significant issue, as high temperatures can cause the water tank to overheat during operation. Pay attention to the following points.

During the operation of the water-cooled Roots blower, we would like to remind users to regularly replace the authorized antifreeze according to the maintenance schedule. Of course, it is also necessary to regularly clean the internal and external surfaces of the water tank. As long as you follow the instructions provided, there should be no issues. This will ensure the water tank remains clean and unobstructed. Moreover, during maintenance, it is important to note that the water tank of the water-cooled Roots blower should be insulated with insulating cotton around the edges to prevent the return of hot air; after all, the equipment is quite expensive. Do not overlook these points during daily use. It is also essential to adjust the tension of the engine fan belt to ensure the fan operates at the correct speed. We also recommend using high-viscosity lubricating oil, as this is a very important issue. Using other lubricating oils may not meet the equipment's requirements. This is something that must be done when maintaining the water-cooled Roots blower. This is because the viscosity of the lubricating oil is high in summer, and doing so can improve the oil's performance and enhance its sealing properties. Please pay close attention to Shandong Baihui Blower Co., Ltd.