Vacuum tumbling machine operators must undergo training before taking up their posts. In the event of a sudden malfunction or other temporary issues during operation, they are prohibited from disassembling the machine on their own. Such situations should be handled under the guidance of relevant personnel or by assigning the task to staff.
Vacuum tumbling machine operators must undergo training before being assigned to their posts. In the event of a sudden malfunction or other temporary issues during operation, they are prohibited from disassembling the machine on their own. Instead, they should seek on-site guidance from relevant personnel or delegate the issue to staff for resolution.
1. Roller揉捏机 Filling: Turn on the vacuum pump, and upon reaching a certain negative pressure, connect the suction tube to the feeding process.
2. Employ vacuum pumps to evacuate and maintain vacuum levels.
3. The roller mill is equipped with a timer setting button, allowing for adjustments according to different requirements to maximize efficiency. Time settings range from seconds to hours.
4. We can adjust the kneading time by scrolling on the control panel. The kneading machine operates with intervals, allowing for customized settings to meet various needs. It's convenient and straightforward. The interval time and working time are set separately, each with its own time control button.
Step 5: Turn the control panel knob to "Run," and switch the vacuum and inflation knobs to "On," initiating the machine to operate in the set mode.
6. After work hours, turn off the roller machine by rotating the control panel's knob to the stop position. If the working time has been set, the machine will automatically shut down upon the time's expiration.
7. The final step in the process is the discharge cleaning. Once the pressure inside and outside the drum is balanced, the ancient drum releases the material. After the discharge, the equipment is cleaned using a cleaning agent mixed with water. Then, it is rinsed with plain water.
