Many customers have different models and specifications of forklifts, whether it's Longgong, Xiamen, Liugong, Xugong, and other series of national or corporate standard forklifts can be reused and modified to fit various specifications of mixer buckets, including 0.4 cubic meters, 0.7 cubic meters, 1 cubic meter, 1.2 cubic meters, and 2 cubic meters. For those looking to install mixer buckets, Ningjin Jinhong Machinery and Equipment's new mixer bucket mounting machine design, manufactured by a hydraulic concrete mixer mounting machine, is a type of engineering equipment. This new machine combines the forklift bucket with a forced double-cylinder concrete mixer, and is suitable for use in the concrete construction industry.
The mixing bucket of the batching machine utilizes the advanced batching machine production technology and the compulsory mixing technology of ready-mixed concrete, installing the compulsory mixing machine through modification in the bucket of the batching machine. It employs the hydraulic transmission system of the batching machine to power the mixer, fully leveraging the convenient mobility and self-loading/unloading features of the batching machine. Additionally, it utilizes the mixing action of the compulsory ready-mixed concrete mixer, allowing a single machine to perform multiple functions such as loading, mixing, site conversion, and unloading. This solution overcomes the drawbacks of using numerous machinery, a large workforce, extensive space requirements, and heavy reliance on power sources in the entire concrete construction process. It achieves the goal of a single machine commonly used, flexibility, and convenience, thereby reasonably reducing construction costs and energy consumption, and promoting energy saving and consumption reduction.
Our mixer bucket product line, developed through thousands of experiments and millions in R&D investment, has successfully applied for multiple technical rights. The internal structure has been optimized to perfection, with the paddle-type mixing shaft as the key mixing component. The non-continuous product structure design allows for handling a high volume of irregularly sized raw materials without jamming. The spiral-toothed structure is prone to jamming with large and fine-grained materials. The mixing blade surface and liner material are made of corrosion-resistant aluminum alloy for durability. All materials are standard components available in the market, making them easily accessible across China. They are not welded, and can be disassembled by simply removing the screws, ensuring easy maintenance and replacement in the later stages.
The mixer is constructed with a dual-motor, dual-reducer design, evenly distributing forces on both sides for enhanced balance. The bucket's internal stress is mitigated, making it less prone to deformation. The reduction mechanism features a large planetary gear reducer, offering a smooth operation and significantly reducing the load on the hydraulic motor. Its application is environmentally friendly and energy-efficient. The sealing structure is designed based on a winning design scheme, ensuring a long service life for the reducer, drastically reducing the frequency of equipment maintenance. The bucket's product structure is designed to fit over 95% of the vehicle models in the market. Due to the compatibility with the vehicle's system software and the operation pressure and flow of the goods, it does not cause damage to the original system. There is no need to replace the high-pressure cleaning pump and the high-voltage system. The low-pressure operation promotes environmental friendliness and energy efficiency for both the system and the vehicle.
The Mixing Drum is a product that our company has successfully applied for and obtained various technologies through multiple tests and demonstrations. The Mixing Drum is composed of a drum shell, a mixing shaft, an arched jaw plate, a reducer, and an oil motor, and is suitable for concrete mixing with stone aggregate diameters not exceeding 50mm. The special model and specifications of the bucket, optimized for the mixing shaft structure, are also suitable for mixing dry powder mortar, UHPC (Ultra-High Performance Concrete), and other materials. We also offer buckets with different volumes ranging from 0.4 to 2 cubic meters. The buckets are equipped with a lower opening feeding device and a guide material plastic hose, enabling quantitative analysis and control of the transportation of cement clinker, greatly facilitating the application in small-scale operations. The installation of the bucket is simple and easy, and the bucket's design is compatible with over 90% of the forklifts on the market. Based on data tests, we can produce assembly methods that meet customers' current forklifts. Customers only need to ensure the required flow rate and pressure for the bucket and install a three-way self-regulating valve to install the bucket and start production. Our company provides full process technical guidance and lifetime technical service consultation.
