What are the technical requirements for the processing technology of metal stamping parts?

The processing technology for metal stamping parts is quite complex. To ensure that the performance of the metal stamping parts meets the usage requirements, it is necessary to adhere to the corresponding process requirements and guarantee the feasibility of production. BelowStamping blank moldWhat are the process and technical requirements for metal stamping parts, as explained by the manufacturer, Kunshan Feiya?

Firstly, when designing the structure and shape of metal stamping parts, it is essential to adopt simple and reasonable surfaces and their combinations, aiming to minimize the number and area of the machined surfaces.

Next, the selection of manufacturing for metal stamping parts is crucial in mechanical manufacturing. Choosing a reasonable method for raw material preparation can involve using profiles, casting, forging, stamping, and welding. The choice of the raw material is related to specific production process conditions, generally depending on production batches, material properties, and processing feasibility.

Thirdly, the requirement for the forming performance of hardware stamping parts is crucial. To enhance the deformation of stamping and product quality, the material should possess good plasticity, a low yield strength to tensile strength ratio, a large directional coefficient in the thickness direction of the plate, and a small directional coefficient in the plate surface direction. The material should also have a small ratio of yield strength to elastic modulus. The separation process does not require material with excellent plasticity, but the material should have a certain degree of plasticity.

The fourth regulation stipulates appropriate manufacturing precision and surface roughness. The cost of metal stamping parts increases with the improvement of precision, particularly under high-precision conditions, where this increase is quite significant. Therefore, the pursuit of high precision should also be based on sufficient justification. The surface roughness of metal stamping parts should be appropriately regulated according to the actual surface requirements.

Kunshan Feiya Precision Molding Co., Ltd., established in 2004, specializes in injection mold design, stamping continuous molds, two-color molds, stamping spring molds, connector injection molds, and tungsten carbide parts processing. We are proficient in the new technologies of insert injection molds and connector injection molds. As a member of Kunshan Cross-border E-commerce Council, we look forward to your call for cooperation.