New energy battery mica tape is the primary insulation material for high-voltage motor windings. The commonly used types of high-voltage motors are 5441 and 5442 epoxy glass powder mica tapes. The adoption of vacuum pressure impregnation (VPI) insulation technology on AC motors and large generators has become a worldwide trend today. It can reduce insulation thickness and enhance the integrity and reliability of the motor.

The selection of mica adhesive for new energy battery is crucial. With low adhesive content, the insulation is fully permeated after VPI treatment, resulting in minimal air gaps and enhanced thermal conductivity of the insulation layer. Therefore, low adhesive content is one of the preferred principles for mica tape. Additionally, the permeability and compatibility of the new energy battery mica adhesive tape with the impregnating resin are also important selection criteria.

The塑云母带 exhibits sufficient softness at room temperature, facilitating the wrapping of coils. It also boasts excellent breathability, which aids in the insulation layer during the air and volatile pressure impregnation (VPI) process. The extraction of the material and the penetration of the resin ensure the overall performance of the coil.

The Single-Sided New Energy Battery Mica Tape is made from mica paper as the base material, reinforced on one side with glass fiber cloth, and bonded with silicone adhesive. It undergoes high-temperature constant-speed baking and is cut by a special high-speed cutting machine. It is an ideal material for manufacturing refractory wire and cable.

Single-sided mica film tape is based on mica paper, with glass fiber cloth and non-carbon polymer (PE) film as the single-sided reinforcement material. Bonded with silicone adhesive and cured through high-temperature uniform baking, the product is cut into strips by a special high-speed cutting machine. It is an ideal choice for manufacturing refractory wire and cable.

The double-sided new energy battery mica tape is made with mica paper as the base material, reinforced on both sides with glass fiber fabric, bonded with silicone adhesive, and then baked at a constant high temperature. It is cut using a special high-speed cutting machine. It is an ideal material choice for manufacturing refractory wire and cable.

The Single-Sided Synthetic Mica Tape for New Energy Battery is made of synthetic mica paper as the base material, reinforced on one side with glass fiber cloth, bonded with silicone adhesive, and then cut after high-temperature, constant-speed baking. It is ideal for manufacturing refractory wire and cable with a dedicated high-speed cutting machine.

In addition to the characteristics of natural mica tape, single-sided synthetic mica tape also possesses the following properties:

In addition to having a low coefficient of expansion, high dielectric strength, high resistivity, and uniform dielectric constant, the main characteristics include high thermal resistance and excellent fire resistance.

Room Temperature Performance: Mica tape, synthetic mica tape, and gold mica tape follow in order.

High-Temperature Insulation Performance: Mica Tape, Phlogopite Tape, Mica Sheet.

High-Temperature Resistance: The synthetic mica tape is made of fluoro-mica, without crystalline water, with a melting point of 1375 degrees Celsius and ample safety margin. Muscovite releases crystalline water above 800 degrees Celsius, and kaolinite does so at 600 degrees Celsius, indicating poorer high-temperature resistance.