Two-seater: 1500mm (L) x 600mm (W) x 780mm (H) (Screen divider: 850mm + 350mm)
1. The screen divider seat features adjustable panels on the left, right, and front sides. The top edge of the adjustable panels is 300mm higher than the side panels, designed to block the view of neighboring candidates. When lowered, it can be used as a standard computer classroom.
2. Tabletop Material Requirements: The material uses 16mm thick environmentally friendly solid wood particleboard with a melamine faced panel. The board meets E1 environmental protection standards, featuring a flat surface, even color, durability, no irritating odor, and formaldehyde emissions less than 1.5mg/L.
3. Rising and falling screen panels: Made with 15mm thick eco-friendly wood particle board covered with melamine board, the material meets E1 environmental standard. The surface is flat, color uniform, sturdy, free of pungent odor, and formaldehyde emissions are less than 1.5mg/L.
4. The table body panels are edged with aluminum alloy, which is joined using an interlocking method. All external surfaces of the aluminum must not show screws or sharp metal parts. The sharp edges of the aluminum profile cut surfaces must not exceed or protrude beyond the table's outer surface, ensuring that the body is not cut during use.
5. To ensure the overall stability and aesthetic appeal of the lifting seat, hidden screws are used for the entire assembly.
6. The lift chair desk is made of E1-grade 25mm particleboard, featuring a fire-retardant panel surface and a duckbill edge design, with formaldehyde emissions lower than 1.5mg/L.
7. The lifting mechanism for the booth seating occupies minimal legroom, ensuring that the table sideboard depth is no less than 540mm to not hinder students' leg movement upon sitting.
8. The built-in power unit of the booth motor has a power of ≤100 watts, and the noise during the lifting and lowering of the motor is ≤48 decibels.
Aluminum alloy panel: Silver
2. Control Methods: Manual, Remote, Centralized
3. Motor Power: 25W/220V, 50/60Hz
Ambient Temperature: -40℃ to 85℃
5. Interface Equipment: 220AC Power Supply, VGA Input, RS232/RS485 Input/Output
6. Pitch Angle: 0°-15°
7. Remote Control Range: 40 meters
8. Operation Mode: Fiber card tooth belt combined with linear guide rail
Noise: Less than 20 decibels
Product Features:
During the rise of the LCD screen, the panel automatically opens, the LCD screen stands upright and extends above the desk, and the power is automatically connected, tilting to a certain angle.
2. When descending, the LCD screen automatically adjusts to a vertical position and shuts off power.
3. The LCD screen's current automatically cuts off and begins to decline, and the decorative panel automatically closes upon the complete descent of the LCD screen.
