The temperature of the filtrate affects the operating conditions of the rubber belt filter press. The temperature of the filtered liquid directly impacts the filter efficiency of the belt filter press and whether the filtration process can proceed normally. When the temperature of the filtrate exceeds the design temperature of the belt vacuum filter press and surpasses the temperature of the filter plates, it can directly lead to deformation of the filter plates in the belt filter, reduce the acid-base resistance of the filter plates, or accelerate the deterioration of already damaged plates.
The temperature of the filtrate also affects the filtration quality of the belt filter press and the efficiency of the filter cloth. As the temperature of the filtrate after filtration increases, the mobility of water molecules becomes stronger, making it easier for water to pass through the filter cloth. Additionally, the temperature of the filtrate after filtration will also be transferred to the filter cloth it comes into contact with. At different temperatures, the pores of the filter cloth will also change directly. When the temperature is high, the temperature of the fibers in the filter cloth will also decrease. It will become higher and the pore size will slightly increase, thereby, the increase in temperature will also improve the filtration efficiency to some extent.
Therefore, when purchasing belt filter equipment, it is essential to inform the belt filter manufacturer of the temperature of the filtrate. Discuss the impact of ambient temperature on the equipment's operation. The current equipment has varying degrees of circuitry. Everyone knows that this circuit operates under high temperatures, accompanied by its own heat, which can sometimes naturally occur. That is to say, it is easy to request some equipment that is too long. The reason for issues in summer.
If it's a hydraulic belt filter, the high environmental temperature must cause the hydraulic unit to cease operation, which may lead to excessive hydraulic oil temperature and hydraulic chamber temperature. Therefore, when using a hydraulic belt filter in summer, more attention should be paid to changes in the hydraulic system.
