JZ-3288 Rubber Shredder, Rubber Waterstop Shredder
The rubber shingle machine and water stop shingle machine are designed for compliance with the GB/T2951 test standard, enabling配套 completion of thermal elongation and tensile tests on samples, thereby ensuring the product meets the standard requirements.
Key Parameters of Rubber Shredder
Maximum Working Width: 190mm - 300mm
Slice Speed: 16.7 m/min
Upper roller adjustment range: 15mm
Power Motor: 1.1 kW
Machine Dimensions: 980*600*450
Rubber Shredder, Waterstop Shredder Instrument Diagram and Function
1. (Back) Stripper Blade 2. Left Adjustment Wheel 3. Positioning Lock Nut 4. Upper Pressure Roller 5. Manual Slicing Wheel 6. Lower Pressure Roller 7. Switch Knob 8. Power Indicator Light 9. Right Adjustment Wheel 10. Oil Filling Port 11. Label
The rubber shredder should be powered on by flipping the switch after plugging in the power supply. The machine will begin to operate. If the roller rotates in the opposite direction, the wiring needs to be reconnected.
Adjust the distance between the upper and lower rollers, (adjust the thickness of the sample) and tighten the locknut slightly to secure it once satisfied. Turn on the power switch to start the machine, insert the cable sample into the cutting slot, and the sample will be processed to reduce its thickness. If the sample is uneven, it can be re-cut.
The rubber shaver is a piece of equipment used in the testing laboratory of product manufacturing factories. It features mechanical feeding and blade-cutting structure, capable of cutting various thicknesses of soft plastics and film materials within a range of 1 to 12 millimeters. It can also be used to slice between rubber, leather, and certain hardness materials. The machine is widely utilized in rubber, plastic, leather, wire, cable, and scientific research units.
