JY-60DA Dry Sand Blasting Machine, Automatic Sand Blasting Machine, Denture Sand Blasting Machine

Composition

This unit consists of the main cabin, dust removal unit, spray gun sandblasting system, air system, and electrical control system. (The main body is made of 2mm steel plate, with a surface coating)

Processing Applicability Range

1) Suitable for dry喷砂（media）processing.

2) Suitable for small batch processing of small parts, including pre-treatment for sandblasting on workpiece surfaces, beautification processing of handicrafts, matte rough treatment of stainless steel products, oil and rust removal from parts, and stress relief for parts.

Technical Data

Dimensions: 600(W) x 980(D) x 1650(H) mm

Work Cabin Dimensions: 580(W) x 520(D) x 600(H) mm

Cabin Door Dimensions: 340 (W) x 430 (H) mm

Barrel Size: ￠220 (diameter) x 170 (height), Load Capacity: 1.5 Kg

Overall Weight: Approximately 100 Kg Net

Power Supply: AC220V, 50Hz, approximately 0.65KW

Tub motor, AC220V, 50Hz, 90W, 13r/min

Dust Extractor Fan, AC220V, 50Hz, 0.55KW, 2800r/min

Lighting fixture, AC220V, 50Hz, 15W incandescent lamp

Control Circuit Voltage AC220V

Spray Gun - 1 Fixed Spray Gun

Nozzle Diameter: 7.5mm

Gas Source Pressure, Displacement: 0.8～1.0 MPa, 1.5 M3/min

Work Pressure: Relief valve gauge pressure after startup is 0.5~0.8 MPa

Single gun gas consumption is approximately 1~1.2 M3/min (determined by the gas source pressure)

Pipe Fitting Size: 13mm OD (hose) or G1/2" (rigid pipe)

Abrasive Types - Recommend using corundum abrasives and glass bead abrasives

Abrasive Particle Size 24# ~ 180#

Abrasive Addition: 5 Kg