The push-type floor cleaner can thoroughly clean various surfaces during the washing process. The machine leaves no trace of water after washing and brushing, with all dirt, mud, and sand being absorbed into the wastewater tank. For oil-stained surfaces, the machine can clean them as if new, surpassing manual cleaning. Moreover, it is cost-effective. The cleaning technology can adjust the cleaning friction force according to the degree of ground stains. The operation of the push-type floor cleaner is simple and easy to learn. Next, let's take a look at it together.

I. Daily Operations

Grip the handles and press down on the machine, tilting the head upwards. Then, place the brush and needle disc at the center of the machine's bottom turntable and rotate them counterclockwise. Flatten the machine, ensuring the base is tightly in contact with the ground. Prepare the wax or cleaning powder, pour it into the water tank of the floor cleaner, and plug in the power cord.

Following equipment maintenance, promptly remove the base, needle holder, and black pad for cleaning. Wipe clean all machine components. Rinse the water tank with clean water and wipe the body with a clean towel. Store in a well-ventilated and dry area.

Three, Cautionary Notes: Avoid the brush coming into contact with power lines while working. Be mindful not to get the motor wet with water. After use, do not remove your hand from the handle carelessly, release the control lever, and only disconnect the power after the machine has completely stopped running. Remove the needle disk and the ground brush.