Advantages of X-ray Fluorescence Spectrometer

High analysis speed. The time required for measurement is related to the measurement precision, but generally quite short, with the entire sample being tested for all elements in just 2 to 5 minutes.

2. X-ray fluorescence spectrometry is unrelated to the chemical bonding state of the sample and is also basically independent of the state of substances such as solids, powders, liquids, crystalline, and amorphous materials. Most analytical elements can be analyzed using this method, allowing for the analysis of samples such as solids, powders, droplets, and liquids, with a range from Be to U. (Gases sealed in containers can also be analyzed.) However, in high-resolution precise measurements, wavelength changes and other phenomena can be observed. Particularly in the soft X-ray range, this effect is more pronounced. Wavelength changes are used for the determination of chemical potentials.

3. Non-destructive Analysis. The testing process does not cause a change in chemical state and no sample dispersion occurs. The same sample can be measured repeatedly with good repeatability of results.

4. X-ray fluorescence analysis is a physical analytical method, allowing for the analysis of elements that belong to the same group in terms of their chemical properties.

High precision in analysis.

6. Sample preparation is simple, accommodating solid, powdered, and liquid samples for analysis.

Above is the introduction of the advantages of the X-ray Fluorescence Spectrometer provided by Tianrui Instrument Co., Ltd. If you have any further questions, feel free to consult our website, where we have professionals ready to explain.

Jiangsu Tianrui Instrument Co., Ltd.

Editor's Choice Content:

What are the brands of RoHS instruments domestically produced?

【ROHS Instrument】ROHS Testing Principles

ThianRui Instruments showcases a variety of environmental protection solutions at CIEPEC 2019