There are many types of electric heaters, and those of you who have been following our website know that they can be categorized into explosion-proof electric heaters, air heaters, molten salt electric heaters, and more. Today, we're talking about duct electric heaters! They are one of the more frequently used devices in our consumer process and their contribution to heating is quite evident. So, what should we pay attention to when installing electric heaters? We've summarized it for you, and those interested can take a look together.
In the structural design of the selected electric heater's internal system, a hole is drilled in the internal roller tube of the electric heater. The welding bevels and burrs are then ground down, allowing the internal structure and components of the electric heater product to effectively dissipate heat.
The structure within our internal system, particularly the size of the holes during heating to accommodate the branches of the electric heater, is appropriate. The assembly and wiring frame for the electric heater is a system where the electric heater outputs a higher power during operation. Therefore, the wiring frames that can be assembled with the electric heater must undergo rigorous inspections during use to ensure all components meet the qualified performance of the electric heater equipment. The installation location of the electric heater should have good ventilation and is not suitable for use in sealed boxes.
The exhaust pipe of the electric heater and the temperature of the air it emits may be extremely high, so caution is advised to prevent burns. Before using a heating fan, it is essential to check if the voltage and current meet the machine's requirements. It is mandatory to use a grounded outlet, and the wiring must comply with specifications. The heating fan is not to be used in any area with water or excessive moisture. If water splashes onto an operating heating fan, it may cause the machine to short-circuit or leak electricity. In the event of an emergency, the emergency stop button should be pressed immediately to shut down the machine. Work can only resume after safety is confirmed.
Safety is paramount when using electric heaters. Jiangsu Kaibo Electrical reminds you not to place the heating fan directly beside the power outlet, avoid touching the internal heating tube with your hands to prevent potential hazards; and ensure the installation location is far from flammable, explosive materials, and gases to minimize risks.
