Cam Spline Divider, also known as cam-type spline divider and intermittent spline divider in engineering.

The cam-type separator is a transmission device that allows for a gapless, vertical engagement between the camshafts on the input shaft and the indexing wheel on the output shaft, both being cam profiles.

• The curved segments of the cam profile drive the indexing wheel to rotate, while the straight segments cause the indexing wheel to stop and lock in place.

• The institution converts continuous input motion into intermittent output motion.

2. Planar Cam

• The flat cam-type divider is a transmission device that allows for gapless parallel engagement between the flat conjugate cam on the input shaft and the indexing wheel on the output shaft.

• The curved segments of the flat cam profile drive the indexing wheel to rotate, while the straight segments keep the indexing wheel stationary and lock it in place.

• The institution converts continuous input movements into intermittent output movements.

The advantages of separators over other components:

• The cam splitter relies on a gapless fit between the cam and roller pin (its meshing transmission method is similar to that of worm and worm gear).

• A device that operates by repeatedly passing along a predetermined cam curve.

• It incorporates continuous rotation drive, outputting intermittent rotation, oscillation, or lifting actions. Primarily used on equipment for automation processing, assembly, and inspection.

3. Cylinder Cam-Type Dividers: Heavy-duty platform-type cylinder cam dividers for specialized lighting equipment, frame-type cam indexing mechanisms for electrical lighting equipment

4. Various special-shaped and end face cam-type separators

• Heart-axis Splitter (DS): Features a heart-axis output shaft, suitable for power sources of intermittent conveyors, gear meshing, and other mechanisms.

• Flanged Splitter: The output shaft features a flanged design. Suitable for heavy-duty rotation plate fixation and various disc processing machinery.

• Hollow Flange Splitter: The output shaft features a flange design and is hollow in the center. Suitable for electrical distribution and pipeline passage.

• The Platform Desktop Cam Slicer: Capable of withstanding heavy loads and radial thrust, it features a raised fixed disk and a large hole at the output shaft end, as well as a hollow shaft, better meeting the customer's requirement for central stillness.

• Ultra-thin Platform Desktop Cam-type Divider: Similar to the platform desktop type, suitable for conditions with heavy loads but limited volume.

• The Parallel Cam Dividing Mechanism: It achieves small divisions (from one division to eight divisions) and large step distance outputs. Particularly suitable for applications that require fewer stops within a cycle, such as various carton die-cutting machines, fruit milk and jelly filling and shaping machines, etc.

• Heavy-duty Cam-type Dividing Mechanism: Capable of multiple divisions (from 4 divisions to 200 divisions). Particularly suitable for heavy-load applications, such as various glass machinery, electrical light source equipment, etc.