Intermittent Separator Technical Selection Chart

If you have any questions about selecting separator specifications, please call for assistance, or fill out the following information and fax it to our company. We will calculate the required specifications for you as soon as possible.

FORM：____________________Company                TO： Dong Zhi Hao Transmission

Contact Person:___________________ Contact: Mr. Cai

TEL：  ____________________  

FAX： _____________________                    

Intermittent Turntable Separator (Direct Drive)/Intermittent Drive

1No Chinese content provided.  S = _________________

2Drive Angle  H = _________________

3. Total Trip Operation Time = Turnaround Time + Positioning Time

1 second = 1 second + 0 seconds

4. Input shaft rotation = _______________RPM (number of products to produce per minute)

5. Cam Curves: □ MS (Standard) □ MT □ MCV

6. Material: □ Steel □ Aluminum □ Other

Outer Diameter = _____________MM Thickness = _____________MM Disc Weight = _____________

7. Part Weight: ___________ KG/pc

8. Fixture Weight: ___________ KG/each; Fixture Rotation Diameter (P.C.D.) = ___________

9. Disk Support:

□ Is   □ No   Friction Radius R1= _________   Friction Coefficient U= _____________

10. The Force of Load During Segmentation

□ is □ No Force = ________kgf Force Radius R2 = _________MM

11. Gear Outer Diameter = ________________MM Weight = _______________KG

12. Outer Diameter of Small Gear = ________________MM Weight = _______________KG