Everyone knows that to achieve better performance of Lanzhou Purification Boards, one must pay attention to certain construction points during installation. Do you know what issues to be aware of when constructing purification panels? If not, feel free to learn more in detail from the Lanzhou Purification Board manufacturer's editor.

Understand the fixation methods of the purification board and pay attention to the key points of its installation.

In most cases, there are two methods for fixing purification boards: through-hole and concealed. Through-hole fixing is a common method for installing purification boards on roofs and walls, involving securing Kunming color steel plates to brackets using self-tapping screws or rivets.

Be mindful of the side and end grinding of the purification plate.

When installing the purification panels, they must be accurately overlapped on the original steel plate and clamped tightly until both ends are secured. Additionally, before installing the next purification panel, each panel must be fully secured, starting from the center of the purification panel and extending outwards to both sides, then securing the overlapping edges of the purification panel.

For terminal joints, as both the roof and wall panels are manufactured using continuous processing techniques, the editor of Lanzhou Purification Panel Factory suggests that you choose purification panels based on their length for terminal joints to avoid affecting their performance.

Copyright Notice: The images in this article are from the internet, intended for learning and exchange purposes only, and do not constitute any commercial use. They are the property of the original copyright holders. If there are any issues, please contact us promptly, and we will delete them as soon as possible.