The stacking of plastic pallet goods is not arbitrary; it varies based on the type of goods, the quality of the goods as described by the plastic pallets, and the standards of the plastic pallets.

Generally, the utilization rate of the carrying area for plastic pallets should typically be no less than 80%. In addition, when stacking goods, it is essential to keep in mind the following 7 points:

Expand paper packaging products and textile goods with waterproof, moisture-proof, and other security protection, stacking single or double-layered, enhancing corner support points with shrink or heat-shrink wrap, and reinforcing structures with cover panels and other structural supports.

2. Paper or chemical fiber products are stacked in single or double layers, secured with binding straps in a crisscross pattern.

3. Hard goods such as wooden, paperboard, and stainless steel containers are stacked single or double-layered in cuboid formation, wrapped with shrink or heat shrink film.

4. Metal materials cylindrical containers or goods are stacked vertically in a single layer to enhance the structural reinforcement of the cargo frame and吕board.

5. Seamless stainless steel cylindrical containers are stacked single or double layered, with wooden cover structures reinforced.

6. Single or double stacking for fragile goods, enhancing the wooden support point partition structure.

Article 7: Pouched goods are stacked in a double-layered, compacted manner.